| Bore diameter | d | 180 | mm |
| Width | B | 86 | mm |
| Basic static load rating, radial | C0r | 1,680,000 | |
| Limiting speed | nG | 2,470 |
| Outside diameter | D | 320 | mm |
| Basic dynamic load rating, radial | Cr | 1,360,000 | |
| Fatigue load limit, radial | Cur | 153,000 | |
| Reference speed | nϑr | 1,670 |
| Minimum diameter shaft shoulder | da min | 197 | mm |
| Maximum recess radius | ra max | 3 | mm |
| Minimum cavity diameter of the sleeve | db min | 191 | mm |
| Maximum diameter of housing shoulder | Da max | 303 | mm |
| Maximum diameter of shaft shoulder | da max | 211 | mm |
| Minimum cavity width of the sleeve | Ba min | 18 | mm |
| Minimum chamfer dimension | rmin | 4 | mm |
| Raceway diameter of the inner ring | d2 | 211.30 | mm |
| Width of lubricating groove | ns | 17.70 | mm |
| Bore diameter outer ring | D1 | 285.90 | mm |
| Diameter lubrication hole | ds | 9.50 | mm |
