| FTF - Characteristic cage frequency | 0,448 Hz | ||
| da min - Min shoulder diameter IR | 315 mm | ||
| ra max - Max shaft & housing fillet radius | 4 mm | ||
| D1 - Inner diameter outer ring | 413 mm | ||
| Number of lubrication holes | 8 | ||
| k - Hole diameter | 10 mm | ||
| C - Dynamic load | 2400 kN | ||
| Cu - Fatigue limit load | 176 kN | ||
| Y0 - Static axial load coefficient | 2.75 | ||
| Y2 - Upper axial load coefficient | 4.19 | ||
| Nlim - Grease lubrication limit speed | 890 tr/min | ||
| Tmax - Max operating temperature | 200 °C | ||
| BPFI - Characteristic inner ring frequency | 14,36 Hz |
| BSF - Characteristic rolling element frequency | 9,333 Hz | ||
| Da max - Max shoulder diameter OR | 445 mm | ||
| Brand | NTN | ||
| rs - Min fillet radius | 4 mm | ||
| b - Groove width | 16 mm | ||
| Radial clearance class | C3 | ||
| C0 - Static load | 3610 kN | ||
| e - Coefficient | 0.24 | ||
| Y1 - Lower axial load coefficient | 2.81 | ||
| Nlim - Oil lubrication limit speed | 1130 tr/min | ||
| Tmin - Min operating temperature | -40 °C | ||
| BPFO - Characteristic outer ring frequency | 11,64 Hz |
