| Shoulder diameter inner ring | d1 | 86.80 | mm |
| Contact angle | α | 25 | ° |
| Caliber diameter outer ring | D2 | 110.70 | mm |
| Distance between the apexes of the pressure cones | a | 61.60 | mm |
| Minimum chamfer dimension | rmin | 1.50 | mm |
| Bore diameter | d | 70 | mm |
| Width | B | 39.70 | mm |
| Basic static load rating, radial | C0r | 79,000 | |
| Limiting speed | nG | 4,150 |
| Outside diameter | D | 125 | mm |
| Basic dynamic load rating, radial | Cr | 82,000 | |
| Fatigue load limit, radial | Cur | 4,100 | |
| Reference speed | nϑr | 5,600 |
| Minimum diameter shaft shoulder | da min | 79 | mm |
| Maximum fillet radius | ra max | 1.50 | mm |
| Maximum diameter of housing shoulder | Da max | 116 | mm |
