Brand | NTN | ||
α - Contact angle | 25 ° | ||
a max - Max position groove | 3,28 mm | ||
rNs - Min fillet radius | 0,6 mm | ||
b min - Min groove width | 1,9 mm | ||
r0 max - Max bottom groove radius | 0,6 mm | ||
f - Stop ring thickness | 1,65 mm | ||
Radial clearance class | CN | ||
C0 - Static load | 20,7 kN | ||
Nlim - Oil lubrication limit speed | 10000 tr/min | ||
Tmin - Min operating temperature | -40 °C | ||
BPFO - Characteristic outer ring frequency | 2,69 Hz | ||
FTF - Characteristic cage frequency | 0,384 Hz | ||
da min - Min shoulder diameter IR | 32 mm | ||
Ca min - Mini segment position | 4,67 mm | ||
ra max - Max shaft & housing fillet radius | 1 mm | ||
Db min - Min stop ring position diameter | 68,4 mm |
a - Charge load application point | 31,8 mm | ||
a min - Min position Groove | 3,07 mm | ||
rs - Min fillet radius | 1,1 mm | ||
D3 - Max bottom groove diameter | 59,61 mm | ||
b max - Max groove width | 2,2 mm | ||
D4 max - Max outer diameter of assembled stop ring | 67,7 mm | ||
Snap ring reference | R62 | ||
C - Dynamic load | 32,5 kN | ||
Cu - Fatigue limit load | 1,3 kN | ||
Nlim - Grease lubrication limit speed | 7500 tr/min | ||
Tmax - Max operating temperature | 120 °C | ||
BPFI - Characteristic inner ring frequency | 4,31 Hz | ||
BSF - Characteristic rolling element frequency | 3,705 Hz | ||
Da max - Max shoulder diameter OR | 55 mm | ||
Ca max - Max segment position | 4,98 mm | ||
rNa max - Max fillet radius on segment side | 0,6 mm |