da max - Max shoulder diameter IR | 88,25 mm | ||
Ca max - Max segment position | 7,72 mm | ||
rNa max - Max fillet radius on segment side | 1 mm | ||
Brand | SNR | ||
a - Charge load application point | 73,3 mm | ||
a min - Min position Groove | 4,65 mm | ||
rs - Min fillet radius | 2,1 mm | ||
D3 - Max bottom groove diameter | 135,23 mm | ||
b max - Max groove width | 3,4 mm | ||
D4 max - Max outer diameter of assembled stop ring | 149,7 mm | ||
Snap ring reference | R 140 | ||
C - Dynamic load | 145 kN | ||
Cu - Fatigue limit load | 7,3 kN | ||
Nref - Reference thermal speed | 4500 tr/min | ||
Tmin - Min operating temperature | -20 °C | ||
BPFO - Characteristic outer ring frequency | 3,138 Hz | ||
FTF - Characteristic cage frequency | 0,392 Hz | ||
da min - Min shoulder diameter IR | 76 mm |
Ca min - Mini segment position | 7,37 mm | ||
ra max - Max shaft & housing fillet radius | 2 mm | ||
Db min - Min stop ring position diameter | 151,8 mm | ||
D1 - Inner diameter outer ring | 122,7 mm | ||
α - Contact angle | 25 ° | ||
a max - Max position groove | 4,9 mm | ||
rNs - Min fillet radius | 1 mm | ||
b min - Min groove width | 3,1 mm | ||
r0 max - Max bottom groove radius | 0,6 mm | ||
f - Stop ring thickness | 2,77 mm | ||
Radial clearance class | CN | ||
C0 - Static load | 118 kN | ||
f0 - Coefficient | 13.60 | ||
Nlim - Mechanical Limit Speed | 3700 tr/min | ||
Tmax - Max operating temperature | 120 °C | ||
BPFI - Characteristic inner ring frequency | 4,862 Hz | ||
BSF - Characteristic rolling element frequency | 4,009 Hz | ||
Da max - Max shoulder diameter OR | 129 mm |