| da max - Max shoulder diameter IR | 88,25 mm | ||
| Ca max - Max segment position | 7,72 mm | ||
| rNa max - Max fillet radius on segment side | 1 mm | ||
| Brand | SNR | ||
| a - Charge load application point | 73,3 mm | ||
| a min - Min position Groove | 4,65 mm | ||
| rs - Min fillet radius | 2,1 mm | ||
| D3 - Max bottom groove diameter | 135,23 mm | ||
| b max - Max groove width | 3,4 mm | ||
| D4 max - Max outer diameter of assembled stop ring | 149,7 mm | ||
| Snap ring reference | R 140 | ||
| C - Dynamic load | 145 kN | ||
| Cu - Fatigue limit load | 7,3 kN | ||
| Nref - Reference thermal speed | 4500 tr/min | ||
| Tmin - Min operating temperature | -20 °C | ||
| BPFO - Characteristic outer ring frequency | 3,138 Hz | ||
| FTF - Characteristic cage frequency | 0,392 Hz | ||
| da min - Min shoulder diameter IR | 76 mm |
| Ca min - Mini segment position | 7,37 mm | ||
| ra max - Max shaft & housing fillet radius | 2 mm | ||
| Db min - Min stop ring position diameter | 151,8 mm | ||
| D1 - Inner diameter outer ring | 122,7 mm | ||
| α - Contact angle | 25 ° | ||
| a max - Max position groove | 4,9 mm | ||
| rNs - Min fillet radius | 1 mm | ||
| b min - Min groove width | 3,1 mm | ||
| r0 max - Max bottom groove radius | 0,6 mm | ||
| f - Stop ring thickness | 2,77 mm | ||
| Radial clearance class | CN | ||
| C0 - Static load | 118 kN | ||
| f0 - Coefficient | 13.60 | ||
| Nlim - Mechanical Limit Speed | 3700 tr/min | ||
| Tmax - Max operating temperature | 120 °C | ||
| BPFI - Characteristic inner ring frequency | 4,862 Hz | ||
| BSF - Characteristic rolling element frequency | 4,009 Hz | ||
| Da max - Max shoulder diameter OR | 129 mm |
