Material bowl | Wrought aluminium alloy | ||
Material seals | NBR | ||
Pneumatic connection, port 2 | G1/2 G3/4 G1 G1 1/4 G1 1/2 1/2 NPT 3/4 NPT 1 NPT 1 1/4 NPT 1 1/2 NPT | ||
Type of mounting | With accessories | ||
Media temperature | -10 °C ... 60 °C | ||
Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Explosion ignition protection type for gas | Ex h IIC T6 Gb X | ||
ATEX category gas | II 2G II 3G | ||
CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
Characteristic coil data | 110 V AC: 50/60 Hz, pick-up power 11.5 VA, holding power 8.9 VA 230 V AC: 50/60 Hz, pick-up power 11.5 VA, holding power 9.1 VA 24 V DC: 4.5 W 24 V DC: 8.4 W | ||
Pressure regulation range | 1 bar ... 16 bar | ||
Pressure gauge (ANALOG) or Pressure display (DIGITAL) | Via pressure sensor With pressure gauge | ||
Bowl guard | Integrated as metal bowl | ||
Max. oil capacity | 490 cm³ | ||
Condensate drain | Fully automatic Manually rotating Semi-automatic | ||
Mounting position | optional Vertical +/-5° | ||
Type of actuation | Electric Manual Pneumatic | ||
Size | 9 |
Material housing | Die-cast aluminium | ||
Pneumatic connection, port 3 | G1 1 NPT | ||
Pneumatic connection, port 1 | G1/2 G3/4 G1 G1 1/4 G1 1/2 1/2 NPT 3/4 NPT 1 NPT 1 1/4 NPT 1 1/2 NPT | ||
Ambient temperature | -10 °C ... 60 °C | ||
Storage temperature | -10 °C ... 60 °C | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Explosion ignition protection type for dust | Ex h IIIC T60°C Db X | ||
ATEX category dust | II 2D II 3D | ||
Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
Approval | c UL us - Recognized (OL) | ||
Standard nominal flow rate | 1.400 l/min ... 18.000 l/min | ||
Operating pressure | 0 bar ... 20 bar | ||
Differential pressure display | Visual display Via pressure sensor | ||
Controller function | Output pressure constant Via primary pressure compensation With secondary venting With return flow function | ||
Max. condensate volume | 220 ml | ||
Grade of filtration | 0,01 µm ... 40 µm | ||
Actuator lock | Rotary knob with integrated lock | ||
Series | MS | ||
Design | Branching module Active carbon filter Pressure regulator with pressure gauge Soft-start/quick exhaust valve On/off valve Fibre filter Filter regulator with pressure gauge Filter regulator without pressure gauge Proportional standard mist lubricator Sintered filter with centrifugal separator |