| BSF - Characteristic rolling element frequency | 5,24 Hz | ||
| Da max - Max shoulder diameter OR | 92 mm | ||
| rNa max - Max fillet radius on segment side | 0,5 mm | ||
| Brand | SNR | ||
| a min - Min position Groove | 3,07 mm | ||
| Ca min - Mini segment position | 5,43 mm | ||
| rs - Min fillet radius | 1,5 mm | ||
| D3 - Max bottom groove diameter | 96,8 mm | ||
| b max - Max groove width | 3 mm | ||
| D4 max - Max outer diameter of assembled stop ring | 106,5 mm | ||
| Snap ring reference | R100 | ||
| C - Dynamic load | 45,7 kN | ||
| Cu - Fatigue limit load | 1,33 kN | ||
| Nref - Reference thermal speed | 7500 tr/min | ||
| Tmin - Min operating temperature | -40 °C | ||
| BPFO - Characteristic outer ring frequency | 4,078 Hz | ||
| FTF - Characteristic cage frequency | 0,408 Hz |
| da max - Max shoulder diameter IR | 65,4 mm | ||
| ra max - Max shaft & housing fillet radius | 1,5 mm | ||
| Db min - Min stop ring position diameter | 108 mm | ||
| D1 - Inner diameter outer ring | 90,9 mm | ||
| a max - Max position groove | 3,28 mm | ||
| Ca max - Max segment position | 5,74 mm | ||
| rNs - Min fillet radius | 0,5 mm | ||
| b min - Min groove width | 2,7 mm | ||
| r0 max - Max bottom groove radius | 0,6 mm | ||
| f - Stop ring thickness | 2,41 mm | ||
| Radial clearance class | CN | ||
| C0 - Static load | 29,3 kN | ||
| f0 - Coefficient | 14.30 | ||
| Nlim - Mechanical Limit Speed | 11000 tr/min | ||
| Tmax - Max operating temperature | 120 °C | ||
| BPFI - Characteristic inner ring frequency | 5,922 Hz | ||
| da min - Min shoulder diameter IR | 63 mm |
