| da max - Max shoulder diameter IR | 35 mm | ||
| ra max - Max shaft & housing fillet radius | 1 mm | ||
| Db min - Min stop ring position diameter | 68,5 mm | ||
| a min - Min position Groove | 3,07 mm | ||
| Ca min - Mini segment position | 4,67 mm | ||
| rs - Min fillet radius | 1,1 mm | ||
| D3 - Max bottom groove diameter | 59,61 mm | ||
| b max - Max groove width | 2,2 mm | ||
| D4 max - Max outer diameter of assembled stop ring | 67,7 mm | ||
| Snap ring reference | R62 | ||
| C - Dynamic load | 23,5 kN | ||
| Cu - Fatigue limit load | 0,855 kN | ||
| Nlim - Grease lubrication limit speed | 8100 tr/min | ||
| Tmax - Max operating temperature | 110 °C | ||
| BPFI - Characteristic inner ring frequency | 4,394 Hz | ||
| BSF - Characteristic rolling element frequency | 3,659 Hz |
| Da max - Max shoulder diameter OR | 55,5 mm | ||
| rNa max - Max fillet radius on segment side | 0,5 mm | ||
| Brand | NTN | ||
| a max - Max position groove | 3,28 mm | ||
| Ca max - Max segment position | 4,98 mm | ||
| rNs - Min fillet radius | 0,5 mm | ||
| b min - Min groove width | 1,9 mm | ||
| r0 max - Max bottom groove radius | 0,6 mm | ||
| f - Stop ring thickness | 1,7 mm | ||
| Radial clearance class | CN | ||
| C0 - Static load | 10,9 kN | ||
| f0 - Coefficient | 12.60 | ||
| Tmin - Min operating temperature | -25 °C | ||
| BPFO - Characteristic outer ring frequency | 2,606 Hz | ||
| FTF - Characteristic cage frequency | 0,372 Hz | ||
| da min - Min shoulder diameter IR | 31,5 mm |
