| da min - Min shoulder diameter IR | 48 mm | ||
| ra max - Max shaft & housing fillet radius | 1,5 mm | ||
| Db min - Min stop ring position diameter | 98 mm | ||
| a min - Min position Groove | 3,07 mm | ||
| Ca min - Mini segment position | 5,43 mm | ||
| rs - Min fillet radius | 1,5 mm | ||
| D3 - Max bottom groove diameter | 86,79 mm | ||
| b max - Max groove width | 3 mm | ||
| D4 max - Max outer diameter of assembled stop ring | 96,5 mm | ||
| Snap ring reference | R90 | ||
| C - Dynamic load | 45 kN | ||
| Cu - Fatigue limit load | 1,83 kN | ||
| Nlim - Grease lubrication limit speed | 7800 tr/min | ||
| Tmax - Max operating temperature | 150 °C | ||
| BPFI - Characteristic inner ring frequency | 4,928 Hz | ||
| BSF - Characteristic rolling element frequency | 4,078 Hz |
| Da max - Max shoulder diameter OR | 82 mm | ||
| rNa max - Max fillet radius on segment side | 0,5 mm | ||
| Brand | NTN | ||
| a max - Max position groove | 3,28 mm | ||
| Ca max - Max segment position | 5,74 mm | ||
| rNs - Min fillet radius | 0,5 mm | ||
| b min - Min groove width | 2,7 mm | ||
| r0 max - Max bottom groove radius | 0,6 mm | ||
| f - Stop ring thickness | 2,46 mm | ||
| Radial clearance class | CN | ||
| C0 - Static load | 24 kN | ||
| f0 - Coefficient | 13.20 | ||
| Tmin - Min operating temperature | -40 °C | ||
| BPFO - Characteristic outer ring frequency | 3,072 Hz | ||
| FTF - Characteristic cage frequency | 0,384 Hz |
