| da min - Min shoulder diameter IR | 12 mm | ||
| ra max - Max shaft & housing fillet radius | 0,3 mm | ||
| Db min - Min stop ring position diameter | 25,5 mm | ||
| a min - Min position Groove | 0,9 mm | ||
| Ca min - Mini segment position | 1,6 mm | ||
| rs - Min fillet radius | 0,3 mm | ||
| D3 - Max bottom groove diameter | 20,8 mm | ||
| b max - Max groove width | 1,05 mm | ||
| D4 max - Max outer diameter of assembled stop ring | 24,8 mm | ||
| Snap ring reference | R22 | ||
| C - Dynamic load | 2,99 kN | ||
| Cu - Fatigue limit load | 0,099 kN | ||
| Nlim - Grease lubrication limit speed | 30000 tr/min | ||
| Tmax - Max operating temperature | 150 °C | ||
| BPFI - Characteristic inner ring frequency | 5,393 Hz | ||
| BSF - Characteristic rolling element frequency | 4,841 Hz |
| Da max - Max shoulder diameter OR | 20 mm | ||
| rNa max - Max fillet radius on segment side | 0,3 mm | ||
| Brand | NTN | ||
| a max - Max position groove | 1,05 mm | ||
| Ca max - Max segment position | 1,75 mm | ||
| rNs - Min fillet radius | 0,3 mm | ||
| b min - Min groove width | 0,8 mm | ||
| r0 max - Max bottom groove radius | 0,2 mm | ||
| f - Stop ring thickness | 0,7 mm | ||
| Radial clearance class | CN | ||
| C0 - Static load | 1,27 kN | ||
| f0 - Coefficient | 14 | ||
| Tmin - Min operating temperature | -40 °C | ||
| BPFO - Characteristic outer ring frequency | 3,607 Hz | ||
| FTF - Characteristic cage frequency | 0,401 Hz |
