Bore diameter | d | 30 | mm |
Width | B | 13 | mm |
Basic static load rating, radial | C0r | 13,400 | |
Limiting speed | nG | 6,900 |
Outside diameter | D | 55 | mm |
Basic dynamic load rating, radial | Cr | 19,900 | |
Fatigue load limit, radial | Cur | 930 | N |
Minimum diameter of shaft shoulder | da min | 34.60 | mm |
Maximum diameter of housing shoulder | Db max | 51.80 | mm |
Maximum fillet radius of housing | ra1 max | 0.60 | mm |
Maximum diameter of housing shoulder | Da max | 50.40 | mm |
Maximum fillet radius of shaft | ra max | 1 | mm |
Minimum chamfer dimension | rmin | 0.60 | mm |
Caliber diameter on outer ring wide side face | D2 | 47.70 | mm |
Shoulder diameter on inner ring wide side face | d1 | 41.30 | mm |
Distance between the apexes of the pressure cones | a | 24 | mm |
Shoulder diameter on outer ring wide side face | D1 | 47.10 | mm |
Caliber diameter on outer ring small side face | D3 | 51.90 | mm |
Caliber diameter on inner ring wide side face | d2 | 38 | mm |
Contact angle | α | 40 | ° |