| Bore diameter | d | 120 | mm |
| Basic dynamic load rating, radial | Cr | 107,000 | |
| Outside diameter | D | 180 | mm |
| Limiting speed | nG | 6,100 |
| Basic static load rating, radial | C0r | 117,000 | |
| Width | B | 28 | mm |
| Reference speed | nϑr | 3,500 | |
| Fatigue load limit, radial | Cur | 6,600 |
| Contact angle | α | 30 | ° |
| Shoulder diameter on inner ring wide side face | d1 | 143.80 | mm |
| Minimum chamfer dimension | rmin | 1 | mm |
| Distance between the apexes of the pressure cones | a | 57 | mm |
| Shoulder diameter on outer ring wide side face | D1 | 156 | mm |
| Maximum fillet radius of housing | ra1 max | 1 | mm |
| Maximum diameter of housing shoulder | Db max | 175.40 | mm |
| Minimum diameter of shaft shoulder | da min | 128.80 | mm |
| Maximum fillet radius of shaft | ra max | 2 | mm |
| Maximum diameter of housing shoulder | Da max | 171.20 | mm |
