Bore diameter | d | 240 | mm |
Width | B | 56 | mm |
Basic static load rating, radial | C0r | 415,000 | |
Limiting speed | nG | 2,700 |
Outside diameter | D | 360 | mm |
Basic dynamic load rating, radial | Cr | 265,000 | |
Fatigue load limit, radial | Cur | 12,500 | |
Reference speed | nϑr | 1,890 |
Minimum diameter of shaft shoulder | da min | 252.40 | mm |
Maximum diameter of housing shoulder | Db max | 354 | mm |
Maximum fillet radius of housing | ra1 max | 1 | mm |
Maximum diameter of housing shoulder | Da max | 347.60 | mm |
Maximum fillet radius of shaft | ra max | 2.50 | mm |
Minimum chamfer dimension | rmin | 1.10 | mm |
Shoulder diameter on inner ring wide side face | d1 | 289.05 | mm |
Contact angle | α | 40 | ° |
Shoulder diameter on outer ring wide side face | D1 | 313.80 | mm |
Distance between the apexes of the pressure cones | a | 154 | mm |