| Bore diameter | d | 280 | mm |
| Width | B | 65 | mm |
| Basic static load rating, radial | C0r | 630,000 | |
| Limiting speed | nG | 2,230 |
| Outside diameter | D | 420 | mm |
| Basic dynamic load rating, radial | Cr | 375,000 | |
| Fatigue load limit, radial | Cur | 17,700 | |
| Reference speed | nϑr | 1,520 |
| Minimum diameter of shaft shoulder | da min | 294.60 | mm |
| Maximum diameter of housing shoulder | Db max | 413 | mm |
| Maximum fillet radius of housing | ra1 max | 1.50 | mm |
| Maximum diameter of housing shoulder | Da max | 405.40 | mm |
| Maximum fillet radius of shaft | ra max | 3 | mm |
| Minimum chamfer dimension | rmin | 1.50 | mm |
| Shoulder diameter on inner ring wide side face | d1 | 333.70 | mm |
| Contact angle | α | 30 | ° |
| Shoulder diameter on outer ring wide side face | D1 | 369.20 | mm |
| Distance between the apexes of the pressure cones | a | 134 | mm |
