| Bore diameter | d | 200 | mm |
| Width | B | 24 | mm |
| Basic static load rating, radial | C0r | 123,000 | |
| Limiting speed | nG | 3,850 |
| Outside diameter | D | 250 | mm |
| Basic dynamic load rating, radial | Cr | 84,000 | |
| Fatigue load limit, radial | Cur | 4,800 | |
| Reference speed | nϑr | 2,100 |
| Minimum diameter of shaft shoulder | da min | 207 | mm |
| Maximum diameter of housing shoulder | Db max | 245.40 | mm |
| Maximum fillet radius of housing | ra1 max | 1 | mm |
| Maximum diameter of housing shoulder | Da max | 243 | mm |
| Maximum fillet radius of shaft | ra max | 1.50 | mm |
| Minimum chamfer dimension | rmin | 1 | mm |
| Shoulder diameter on inner ring wide side face | d1 | 219.60 | mm |
| Contact angle | α | 30 | ° |
| Shoulder diameter on outer ring wide side face | D1 | 231.40 | mm |
| Distance between the apexes of the pressure cones | a | 77 | mm |
