| Bore diameter | d | 260 | mm |
| Width | B | 28 | mm |
| Basic static load rating, radial | C0r | 192,000 | |
| Limiting speed | nG | 2,950 |
| Outside diameter | D | 320 | mm |
| Basic dynamic load rating, radial | Cr | 123,000 | |
| Fatigue load limit, radial | Cur | 6,500 | |
| Reference speed | nϑr | 1,670 |
| Minimum diameter of shaft shoulder | da min | 268.80 | mm |
| Maximum diameter of housing shoulder | Db max | 315.40 | mm |
| Maximum fillet radius of housing | ra1 max | 1 | mm |
| Maximum diameter of housing shoulder | Da max | 311.20 | mm |
| Maximum fillet radius of shaft | ra max | 2 | mm |
| Minimum chamfer dimension | rmin | 1 | mm |
| Shoulder diameter on inner ring wide side face | d1 | 284 | mm |
| Contact angle | α | 30 | ° |
| Shoulder diameter on outer ring wide side face | D1 | 296 | mm |
| Distance between the apexes of the pressure cones | a | 98 | mm |
