| Distance between the apexes of the pressure cones | a | 67 | mm |
| Minimum chamfer dimension | rmin | 1 | mm |
| Shoulder diameter on inner ring wide side face | d1 | 117.50 | mm |
| Contact angle | α | 40 | ° |
| Shoulder diameter on outer ring wide side face | D1 | 133.40 | mm |
| Bore diameter | d | 90 | mm |
| Width | B | 30 | mm |
| Basic static load rating, radial | C0r | 98,000 | |
| Limiting speed | nG | 5,500 |
| Outside diameter | D | 160 | mm |
| Basic dynamic load rating, radial | Cr | 114,000 | |
| Fatigue load limit, radial | Cur | 6,100 | |
| Reference speed | nϑr | 4,550 |
| Minimum diameter of shaft shoulder | da min | 101 | mm |
| Maximum diameter of housing shoulder | Db max | 154.40 | mm |
| Maximum fillet radius of housing | ra1 max | 1 | mm |
| Maximum diameter of housing shoulder | Da max | 149 | mm |
| Maximum fillet radius of shaft | ra max | 2 | mm |
| Manufacturer | Part Number |
|---|---|
| SKF | 7218 BE-GA-P (SKF) |
