| Bore diameter | d | 170 | mm |
| Width | B | 52 | mm |
| Basic static load rating, radial | C0r | 355,000 | |
| Limiting speed | nG | 3,250 |
| Outside diameter | D | 310 | mm |
| Basic dynamic load rating, radial | Cr | 270,000 | |
| Fatigue load limit, radial | Cur | 11,900 | |
| Reference speed | nϑr | 2,440 |
| Minimum diameter of shaft shoulder | da min | 187 | mm |
| Maximum diameter of housing shoulder | Db max | 301 | mm |
| Maximum fillet radius of housing | ra1 max | 1.50 | mm |
| Maximum diameter of housing shoulder | Da max | 293 | mm |
| Maximum fillet radius of shaft | ra max | 3 | mm |
| Minimum chamfer dimension | rmin | 1.50 | mm |
| Shoulder diameter on inner ring wide side face | d1 | 227.40 | mm |
| Contact angle | α | 40 | ° |
| Shoulder diameter on outer ring wide side face | D1 | 255.80 | mm |
| Distance between the apexes of the pressure cones | a | 127 | mm |
