Bore diameter | d | 20 | mm |
Width | B | 15 | mm |
Basic static load rating, radial | C0r | 10,000 | |
Limiting speed | nG | 25,000 |
Outside diameter | D | 52 | mm |
Basic dynamic load rating, radial | Cr | 20,200 | |
Fatigue load limit, radial | Cur | 700 | N |
Reference speed | nϑr | 11,700 |
Minimum diameter of shaft shoulder | da min | 27 | mm |
Maximum diameter of housing shoulder | Db max | 47.80 | mm |
Maximum fillet radius of housing | ra1 max | 0.60 | mm |
Maximum diameter of housing shoulder | Da max | 45 | mm |
Maximum fillet radius of shaft | ra max | 1 | mm |
Minimum chamfer dimension | rmin | 0.60 | mm |
Shoulder diameter on inner ring wide side face | d1 | 33.04 | mm |
Contact angle | α | 40 | ° |
Shoulder diameter on outer ring wide side face | D1 | 39.70 | mm |
Distance between the apexes of the pressure cones | a | 23 | mm |