| Bore diameter | d | 130 | mm |
| Width | B | 58 | mm |
| Basic static load rating, radial | C0r | 325,000 | |
| Limiting speed | nG | 3,050 |
| Outside diameter | D | 280 | mm |
| Basic dynamic load rating, radial | Cr | 305,000 | |
| Fatigue load limit, radial | Cur | 15,900 | |
| Reference speed | nϑr | 2,600 |
| Minimum diameter of shaft shoulder | da min | 147 | mm |
| Maximum diameter of housing shoulder | Db max | 271 | mm |
| Maximum fillet radius of housing | ra1 max | 1.50 | mm |
| Maximum diameter of housing shoulder | Da max | 263 | mm |
| Maximum fillet radius of shaft | ra max | 3 | mm |
| Minimum chamfer dimension | rmin | 1.50 | mm |
| Shoulder diameter on inner ring wide side face | d1 | 188.50 | mm |
| Contact angle | α | 40 | ° |
| Shoulder diameter on outer ring wide side face | D1 | 222.50 | mm |
| Distance between the apexes of the pressure cones | a | 115 | mm |
