Stroke | 1 mm ... 400 mm | ||
Based on standard | ISO 21287 | ||
Mounting position | optional | ||
Position detection | Via proximity switch | ||
Operating pressure | 0,6 bar ... 10 bar | ||
CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
ATEX category dust | II 2D | ||
Explosion ignition protection type for dust | Ex h IIIC T120°C Db | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Corrosion resistance class CRC | 0 - No corrosion stress 2 - Moderate corrosion stress 3 - high corrosion stress | ||
Suitability for the production of Li-ion batteries | Metals with more than 1% copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils | ||
Ambient temperature | -40 °C ... 120 °C | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 1.750 N ... 1.870 N | ||
Additional moving mass per 10 mm stroke | 16 g | ||
Additional weight per 10 mm stroke | 59 g | ||
Pneumatic connection | G1/8 | ||
Material cover | Aluminium Anodised | ||
Material cylinder barrel | Wrought aluminium alloy Smooth anodised |
Piston diameter | 63 mm | ||
Cushioning | Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning | ||
Design | Piston Piston rod Profile barrel | ||
Variants | EX protection approval (ATEX) Metals with copper, zinc or nickel as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils. Improved running performance Extended male piston rod thread Custom thread on the piston rod Extended piston rod With protection against rotation High corrosion protection Dust protection Reinforced piston rod Uniform, slow movement Low friction Through piston rod Through, hollow piston rod Heat-resistant seals max. 120°C Laser etched rating plate Temperature range -40 to 80°C Piston rod at one end | ||
Mode of operation | Double-acting | ||
CE marking (see declaration of conformity) | To UK EX instructions | ||
ATEX category gas | II 2G | ||
Explosion ignition protection type for gas | Ex h IIC T4 Gb | ||
Explosion ambient temperature | -20°C <= Ta <= +60°C | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
LABS (PWIS) conformity | VDMA24364-B1/B2-L VDMA24364 zone III | ||
Cleanroom class | Class 4 according to ISO 14644-1 Class 5 according to ISO 14644-1 | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 1.750 N | ||
Moving mass for 0 mm stroke | 180 g | ||
Basic weight for 0 mm stroke | 722 g | ||
Type of mounting | With through-hole Via female thread With accessories Either: | ||
Note on materials | RoHS-compliant | ||
Material piston rod | High-alloy steel |