536330 Festo

FESTO 536330 compact cylinder

Name: 536330 FESTO
Brand: FESTO
SKU: 721653-en-usd
Price: 341.05 USD
Availability: InStock

ADN-63-50-A-P-A-S11

$341.05 1 pcs. with 1 to 3 days delivery to United States

Specifications

Series (ADN)	Compact cylinder, double-acting, based on ISO 21287
Piston diameter [mm] (63)	63
Stroke [mm] (50)	50
Piston rod thread type (A)	Male thread
Cushioning (P)	Elastic cushioning rings/plates on both sides
Position sensing (A)	For proximity sensor
Special material properties	None
Protection against rotation	None
Piston rod type	At one end
Custom thread	None

Temperature range	Standard
Constant motion	Standard
Running characteristics (S11)	Low friction
Improved running performance	None
Corrosion protection	Standard
Captive rating plate	Rating plate, glued
Low temperature	None
Scraper variant	Standard
EU certification	None

Technical data

ATEX category gas		II 2G
Piston diameter		63 mm
Cushioning		Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning
Design		Piston Piston rod Profile barrel
Variants		EX protection approval (ATEX) Metals with copper, zinc or nickel as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils. Improved running performance Extended male piston rod thread Custom thread on the piston rod Extended piston rod With protection against rotation High corrosion protection Dust protection Reinforced piston rod Uniform, slow movement Low friction Through piston rod Through, hollow piston rod Heat-resistant seals max. 120°C Laser etched rating plate Temperature range -40 to 80°C Piston rod at one end
Mode of operation		Double-acting
CE marking (see declaration of conformity)		To UK EX instructions
ATEX category dust		II 2D
Explosion ignition protection type for dust		Ex h IIIC T120°C Db
Operating medium		Compressed air to ISO 8573-1:2010 [7:4:4]
Corrosion resistance class CRC		0 - No corrosion stress 2 - Moderate corrosion stress 3 - high corrosion stress
Suitability for the production of Li-ion batteries		Metals with more than 1% copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils
Ambient temperature		-40 °C ... 120 °C
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke		1.750 N ... 1.870 N
Additional moving mass per 10 mm stroke		16 g
Additional weight per 10 mm stroke		59 g
Pneumatic connection		G1/8
Material cover		Aluminium Anodised
Material cylinder barrel		Wrought aluminium alloy Smooth anodised

Stroke		1 mm ... 400 mm
Based on standard		ISO 21287
Mounting position		optional
Position detection		Via proximity switch
Operating pressure		0,6 bar ... 10 bar
CE mark (see declaration of conformity)		To EU Explosion Protection Directive (ATEX)
Explosion protection		Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
Explosion ignition protection type for gas		Ex h IIC T4 Gb
Explosion ambient temperature		-20°C <= Ta <= +60°C
Note on operating and pilot medium		Lubricated operation possible (in which case lubricated operation will always be required)
LABS (PWIS) conformity		VDMA24364-B1/B2-L VDMA24364 zone III
Cleanroom class		Class 4 according to ISO 14644-1 Class 5 according to ISO 14644-1
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke		1.750 N
Moving mass for 0 mm stroke		180 g
Basic weight for 0 mm stroke		722 g
Type of mounting		With through-hole Via female thread With accessories Either:
Note on materials		RoHS-compliant
Material piston rod		High-alloy steel