Cushioning | Elastic cushioning rings/plates at both ends | ||
Spring return force with retracted piston rod | 50 N | ||
Stroke | 25 mm | ||
Material housing | Wrought aluminium alloy Anodised | ||
Material cover | Wrought aluminium alloy Anodised | ||
Type of mounting | With through-hole With accessories Either: | ||
Moving mass | 191 g | ||
Ambient temperature | -20 °C ... 80 °C | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Operating pressure | 1 bar ... 10 bar | ||
Position detection | Without | ||
Mode of operation | Single-acting Pushing |
Based on standard | ISO 6431 Hole pattern VDMA 24562 | ||
Piston diameter | 63 mm | ||
Material piston rod | High-alloy steel | ||
Material seals | NBR TPE-U(PU) | ||
Pneumatic connection | G1/8 | ||
Product weight | 667 g | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 1.799 N | ||
Corrosion resistance class CRC | 1 - Low corrosion stress | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Symbol | 991,730 | ||
Design | Piston Piston rod | ||
Mounting position | optional |