Bore diameter | d | 12 | mm |
Width | B | 8 | mm |
Basic static load rating, radial | C0r | 1,750 | |
Limiting speed for grease lubrication | nG Grease | 53,000 |
Outside diameter | D | 28 | mm |
Basic dynamic load rating, radial | Cr | 4,450 | |
Fatigue load limit, radial | Cur | 185 | N |
Limiting speed for oil lubrication | nG Oil | 85,000 |
Diameter shaft shoulder | da | 16.50 | mm |
Shoulder diameter outer ring | Da | 24.50 | mm |
Maximum recess radius | ra max | 0.10 | mm |
Maximum diameter injection pitch | Etk max | 18.80 | mm |
Diameter shaft shoulder clearance | da | h12 | |
Shoulder diameter outer ring clearance | Da | H12 | |
Minimum diameter injection pitch | Etk min | 17.90 | mm |
Distance between the apexes of the pressure cones | a | 8.70 | mm |
Minimum chamfer dimension | rmin | 0.30 | mm |
Contact angle | α | 25 | ° |