| Bore diameter | d | 75 | mm |
| Width | B | 20 | mm |
| Basic static load rating, radial | C0r | 32,500 | |
| Limiting speed for grease lubrication | nG Grease | 12,000 |
| Outside diameter | D | 115 | mm |
| Basic dynamic load rating, radial | Cr | 52,000 | |
| Fatigue load limit, radial | Cur | 3,450 | |
| Limiting speed for oil lubrication | nG Oil | 19,000 |
| Diameter shaft shoulder | da | 82 | mm |
| Shoulder diameter outer ring | Da | 107 | mm |
| Maximum recess radius | ra max | 0.60 | mm |
| Maximum diameter injection pitch | Etk max | 91.70 | mm |
| Diameter shaft shoulder clearance | da | h12 | |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Minimum diameter injection pitch | Etk min | 87.40 | mm |
| Distance between the apexes of the pressure cones | a | 22.70 | mm |
| Minimum chamfer dimension | rmin | 1.10 | mm |
| Contact angle | α | 15 | ° |
