Stroke | 1 mm ... 400 mm | ||
Based on standard | ISO 21287 | ||
Mounting position | optional | ||
Position detection | Via proximity switch | ||
Operating pressure | 0,6 bar ... 10 bar | ||
CE mark (see declaration of conformity) | To EU EMC Directive | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Corrosion resistance class CRC | 3 - high corrosion stress | ||
Suitable for use with food | See supplementary material information | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 415 N | ||
Type of mounting | With through-hole Via female thread Either: | ||
Material cover | Wrought aluminium alloy Anodised | ||
Material cylinder barrel | Wrought aluminium alloy Anodised |
Piston diameter | 32 mm | ||
Cushioning | Elastic cushioning rings/plates at both ends | ||
Design | Piston Piston rod | ||
Variants | Extended male piston rod thread Custom thread on the piston rod Extended piston rod Through piston rod Heat-resistant seals max. 120°C Piston rod at one end | ||
Mode of operation | Double-acting | ||
CE marking (see declaration of conformity) | To UK instructions for EMC | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
LABS (PWIS) conformity | VDMA24364-B2-L VDMA24364 zone III | ||
Ambient temperature | -20 °C ... 120 °C | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 415 N ... 483 N | ||
Pneumatic connection | G1/8 | ||
Material piston rod | High-alloy stainless steel |