Total stroke | 28 mm | ||
Piston rod thread | M8 | ||
Clamping stroke | 10 mm | ||
Mounting position | optional | ||
Position detection | Via proximity switch | ||
Symbol | 991,217 | ||
Mode of operation | Double-acting | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Ambient temperature | -10 °C ... 80 °C | ||
Effective clamping force at 0.4 MPa (4 bar, 58 psi) | 355 N | ||
Max. tightening torque Clamping finger screw | 24 Nm | ||
Product weight | 880 g | ||
Pneumatic connection | G1/8 | ||
Material cover | Wrought aluminium alloy Coated | ||
Material housing | Wrought aluminium alloy Smooth anodised | ||
Material cylinder barrel | Wrought aluminium alloy Smooth anodised |
Piston diameter | 40 mm | ||
Swivel angle | 90 deg +/-2 deg | ||
Cushioning | Elastic cushioning rings/plates at both ends | ||
Design | Piston Piston rod Cylinder barrel | ||
Swivel direction | Left | ||
Operating pressure | 2 bar ... 10 bar | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
Effective clamping force at 0.2 MPa (2 bar, 29 psi) | 176 N | ||
Effective clamping force at 0.6 MPa (6 bar, 87 psi) | 536 N | ||
Theoretical clamping force at 0.6 MPa (6 bar, 87 psi) | 633 N | ||
Type of mounting | With through-hole Via female thread With accessories Either: | ||
Material collar screws | Steel Galvanised | ||
Material seals | NBR TPE-U(PU) | ||
Material piston rod | High-alloy stainless steel |