| Features of digital logic outputs | Galvanically isolated Freely configurable in some cases | ||
| Number of analogue setpoint inputs | 2 | ||
| Working range setpoint input | ± 10 V | ||
| Number of analogue monitor outputs | 2 | ||
| Resolution of monitor outputs | 9 bit | ||
| Type of mounting | On sub-base Screw-clamped | ||
| Display | 7-segment display | ||
| CE mark (see declaration of conformity) | To EU EMC Directive To EC Machinery Directive To EU Low Voltage Directive In accordance with EU RoHS Directive | ||
| Storage temperature | -25 °C ... 70 °C | ||
| Relative air humidity | 0 - 90% | ||
| Pollution degree | 2 | ||
| LABS (PWIS) conformity | VDMA24364 zone III | ||
| Nominal operating voltage AC | 400 V | ||
| Mains frequency | 50 Hz ... 60 Hz | ||
| Mains filter | Integrated | ||
| Brake resistance | 68 Ohm | ||
| Nominal voltage for logic power supply DC | 24 V | ||
| Current consumption of logic power supply without clamping brake | 1 A | ||
| Nominal output current | 10 A | ||
| Peak current per phase, effective | 20 A | ||
| Controller nominal output | 6.000 VA | ||
| Output frequency | 0 Hz ... 1.000 Hz | ||
| Fieldbus link | CANopen DeviceNet EtherCAT EtherNet/IP Modbus/TCP PROFINET Profibus DP | ||
| Process interfacing | I/O coupling For 256 position sets | ||
| Bus connection | Plugs 9-pin Sub-D | ||
| Encoder interface output, function | Actual value feedback via encoder signals in speed control mode. Setpoint specification for downstream slave drive. | ||
| Encoder interface input, function | Setpoint speed value as encoder signal Specifies the speed of the slave drive in synchronous mode. | ||
| Features of logic input | Galvanically isolated Freely configurable | ||
| Number of digital logic outputs 24 V DC | 5 |
| Max. current digital logic outputs | 100 mA | ||
| Features of setpoint inputs | Differential inputs Configurable for speed Configurable for current | ||
| Impedance of setpoint input | 20 kOhm | ||
| Working range of monitor outputs | ± 10 V | ||
| Features of monitor outputs | Short-circuit proof | ||
| Product weight | 3.450 g | ||
| Approval | RCM trademark c UL us listed (OL) | ||
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK regulations for machines To UK regulations for electrical equipment To UK RoHS instructions | ||
| Ambient temperature | 0 °C ... 40 °C | ||
| Degree of protection | IP10 IP20 | ||
| Note on materials | RoHS-compliant | ||
| Phases of nominal operating voltage | 3-phase | ||
| Permissible voltage fluctuations | +/- 10 % | ||
| Nominal current | 11 A | ||
| Max. intermediate circuit voltage DC | 560 V | ||
| Pulse power, brake resistance | 8,5 kVA | ||
| Permissible range for logic voltage | ± 20 % | ||
| Output voltage class AC | 3x 0 - 360 V | ||
| Nominal current per phase, effective | 10 A | ||
| Max. peak current duration | 5 s | ||
| Maximum output | 12.000 VA | ||
| Parameterisation interface | Parameterisation and commissioning USB Ethernet | ||
| Communication profile | DS301/DSP402 FHPP | ||
| Max. fieldbus transmission rate | 1 Mbit/s | ||
| Encoder interface output, features | Resolution 16384 ppr | ||
| Encoder interface input, features | 3-phase encoder signals EnDat HIPERFACE RS422 SINCOS | ||
| Number of digital logic inputs | 10 | ||
| Working range of logic input | 8 V ... 30 V |
