Festo 572211 motor controller

Name: 572211 Festo
Brand: Festo
SKU: 682148-en-usd
Price: 1598.78 USD
Availability: InStock

CMMS-ST-C8-7-G2

$1,598.78 2 pcs. with 1 to 3 days delivery to United States

Specifications

Nominal input voltage (7)	48 V DC
Generation (G2)	2nd generation

Impedance of setpoint input		20 kOhm
Working range of monitor outputs		± 10 V
Performance Level (PL)		Safe Torque Off (STO)/category 3, performance level d
Product weight		2.000 g
Operator controls		DIP switch
CE mark (see declaration of conformity)		To EU EMC Directive To EC Machinery Directive In accordance with EU RoHS Directive
Certificate issuing authority		BG MFS 09031
Ambient temperature		0 °C ... 50 °C
Degree of protection		IP20
Note on materials		RoHS-compliant
Nominal current, load supply		8 A
Mains filter		Integrated
Max. intermediate circuit voltage DC		58 V
Pulse power, brake resistance		0,5 kVA
Permissible range for logic voltage		± 20 %
Output voltage class AC		0 V up to input voltage
Output frequency		0 Hz ... 2.000 Hz
Controller operating mode		PWM MOSFET power output stage
Adjustable current reduction		Via software
Protective function		I²t monitoring Temperature monitoring Current monitoring Voltage failure detection Following error monitoring
Max. step frequency		4 kHz
Fieldbus link		CANopen Profibus DP
Bus terminator resistor		Integrated
Position sensor		Encoder
Encoder interface input, features		RS422
Features of digital logic outputs		Freely configurable in some cases Not galvanically isolated
Number of analogue setpoint inputs		1

Number of analogue monitor outputs		1
Safety function		Safe torque off (STO)
Type of mounting		On sub-base Screw-clamped
Display		7-segment display
Approval		BIA C-Tick c UL us listed (OL)
CE marking (see declaration of conformity)		To UK instructions for EMC To UK regulations for machines To UK RoHS instructions
Storage temperature		-25 °C ... 70 °C
Relative air humidity		0 - 90% Non-condensing
Pollution degree		2
LABS (PWIS) conformity		VDMA24364-B2-L
Peak current load power supply		12 A
Nominal voltage load voltage DC		48 V
Brake resistance		17 Ohm
Nominal voltage for logic power supply DC		24 V
Nominal current logic power supply		0,2 A
Max. peak current duration		2 s
Max. length of motor cable without external mains filter		25 m
Operating mode of drive unit		Micro step, >4000 steps/revolution
Step adjustment		Via software
Nominal current setting		Via software
Parameterisation interface		RS232 (9600...115000 bits/s)
Bus connection		Plugs 9-pin Sub-D
Rotor position sensor		Encoder
Encoder interface output, function		Setpoint specification for downstream slave drive.
Encoder interface input, function		Specifies the speed of the slave drive in synchronous mode.
Max. current digital logic outputs		100 mA
Working range setpoint input		± 10 V