Festo 8084006 linear drive

CMMT-ST-C8-1C-EP-S0

$736.91 1 pcs. with 1 to 3 days delivery to United States

Specifications

Mounting Position Free convection Vertical
Weight 350g
Proof test interval STO/20 a (stepper motor/EC motor without diagnostics)
Number of diagnostic outputs 1
Mounting position Free convection Vertical
Display Green/yellow/red LED
KC mark KC-EMV
Certificate issuing authority German Technical Control Board (TÜV) Rheinland 01/205/5696.00/19 UL E331130
Ambient temperature 0 °C ... 50 °C
Relative air humidity 5 - 90% Non-condensing
Degree of protection IP20
Overvoltage category I
Note on materials Contains paint-wetting impairment substances RoHS-compliant
Permissible range for load power supply -15%/+15%
Nominal voltage for logic power supply DC 24 V
Current consumption of logic power supply without clamping brake 1 A
Output voltage class AC 0 V up to input voltage
Nominal current per phase, effective 8 A
Max. peak current duration 3 s
Maximum output 400 VA
Max. length of motor cable without external mains filter 25 m
Max. voltage drop from logic supply to brake output 1 V
Operating mode of drive unit Field-oriented closed-loop control Position resolution 24 bit/rev Sampling rate 20 kHz PWM with 20 kHz Real-time data acquisition 2x input capture (x, v, F) 2x output trigger (x, v, F) 1x position encoder input
Protective function I²t monitoring Temperature monitoring Current monitoring Voltage failure detection Following error monitoring Software end-position detection
Ethernet interface, function Parameterisation and commissioning
Field bus, protocol EtherNet/IP
Fieldbus link EtherNet/IP Modbus/TCP
Process interfacing Adjustable-speed drives Drives with positioning function
Field bus, connection type 2x socket
Encoder interface, function BiSS-C Incremental encoder
Switching logic for inputs NPN (negative switching) PNP (positive switching)
Specification logic input Based on IEC 61131-2, type 3
Number of high-speed logic inputs 2
Number of digital logic outputs 24 V DC 2
Features of digital logic outputs Configurable Not galvanically isolated
Number of high-speed switching outputs 2
Number of floating switching outputs 1
Safety function Safe torque off (STO) Safe stop 1 time controlled (SS1-t)
Performance Level (PL) STO/Cat. 3, PLd (EC motor without diagnostics) STO/Cat. 3, PLe (stepper motor/EC motor with diagnostics)
Hardware fault tolerance 1
Number of safe 2-pin inputs 1
Type of mounting Mounting plate, attached with screws With H-rail
Product weight 350 g
Approval RCM trademark c UL us listed (OL)
CE mark (see declaration of conformity) To EU EMC Directive To EC Machinery Directive In accordance with EU RoHS Directive
Storage temperature -25 °C ... 55 °C
Note on ambient temperature Observe the derating regarding the mounting clearance and output current.
Max. installation height 2.000 m
Protection class III
Pollution degree 2
Nominal voltage load voltage DC 24 V ... 48 V
Max. intermediate circuit voltage DC 60 V
Permissible range for logic voltage ± 15 %
Current consumption for logic supply with parking brake 2 A
Nominal output current 8 A
Peak current per phase, effective 10 A
Controller nominal output 300 VA
Output frequency 0 Hz ... 20.000 Hz
Max. output current of holding brake 1 A
Controller operating mode Cascade controller P position controller PI speed controller PI current regulator for F or M Profile operation with record and direct mode Interpolated mode via fieldbus Synchronised operating modes Homing Setting-up Autotuning Open-loop operation
Adjustable current reduction Via software
Nominal current setting Via software
Ethernet interface, protocol TCP/IP
Fieldbus interface, function Bus connection incoming/outgoing EtherNet/IP slave
Communication profile DriveProfile
Field bus interface, transmission rate 100 Mbit/s
Field bus, connection system RJ45
Number of digital logic inputs 6
Features of logic input Freely configurable in some cases Safety inputs in some cases Not galvanically isolated
Working range of logic input -3 V ... 30 V
Time resolution of high-speed logic inputs 1 µs
Switching logic for outputs NPN (negative switching) PNP (positive switching)
Max. current digital logic outputs 100 mA
Time resolution of high-speed switching outputs 1 µs
Max. current of the floating switching outputs 100 mA
Safety Integrity Level (SIL) STO/SIL 2/SILCL 2 (EC motor without diagnostics) STO/SIL 3/SILCL 3 (stepper motor/EC motor with diagnostics)
Diagnostic coverage STO: 87% (EC motor without diagnostics) STO/90% (stepper motor) STO: 92% (EC motor with diagnostics)
$736.91
Stock 1 pcs.
Part number 8084006
Manufacturer Festo
Quantity Unit Price
1+ $736.91
  • Open Registration
    Create your account instantly
  • Support 24/7
    Ask us anytime
  • 100% Safety
    Only secure payments: bank transfer, credit card and PayPal
  • Volume Discounts
    Optimize your supplies