3605478 Festo

FESTO 3605478 controller

Name: 3605478 FESTO
Brand: FESTO
SKU: 670207-en-usd
Price: 1391.58 USD
Availability: InStock

CMXH-ST2-C5-7-DIOP

$1,391.58 1 pcs. with 1 to 3 days delivery to United States

Specifications

Series (CMXH)	Controller
Motor type (ST)	Stepper motor ST
Number of axes (2)	2 units
Nominal current (C5)	5 A

Nominal input voltage (7)	48 V DC
Bus protocol/activation (DIO)	Digital I/O interface
Switching input/output (P)	PNP

Technical data

Diagnostic coverage		90 %
Type of mounting		On H-rail via accessories Via screws in slots
Approval		RCM trademark
Certificate issuing authority		01/205/5519.00/16 TÜV Rheinland
Storage temperature		-25 °C ... 75 °C
Relative air humidity		0 - 90% Non-condensing
Electrical connection system I/Os		Socket, sub-D, 15-pin
Number of digital logic outputs 24 V DC		5
Bus connection		Plugs 9-pin Sub-D
Process interfacing		For 31 sets
Permissible range for logic voltage		± 15 %
Note on digital logic inputs / outputs		Alternatively, 24 V is also possible.
Current consumption of logic power supply without clamping brake		0,2 A
Brake resistance		15 Ohm
Mains filter		Integrated
Permissible load current		12 A
Power failure bridging		10 ms
Status displays		7-segment display LED
Ethernet, supported protocols		TCP/IP, Modbus TCP
Shock resistance test		EN 60068-2-27
Total number of axes		2
Communication profile		FHPP
Note on max. fieldbus transmission rate		1 Mbit/s with CANopen
Programming software		FCT (Festo Configuration Tool)
Device-specific diagnostics		Diagnostic memory Short circuit in motor winding Undervoltage/overvoltage System- and motor-oriented diagnostics
Parameterisation		System parameter
Ethernet interface		RJ45 (socket, 8-pin)
LED display, product-specific		POWER: Load voltage applied
Performance Level (PL)		Safe Torque Off (STO)/category 3, performance level e
Proof test interval		20 y
Certified for safety functions to ISO 13849 (PL)		Product can be used in SRP/CS up to category 3, PL e
Mean time to dangerous failure (MTTFd)		STO/5700 years
Hardware fault tolerance		1

Ambient temperature		0 °C ... 50 °C
Product weight		700 g
CE mark (see declaration of conformity)		To EU EMC Directive To EC Machinery Directive
Degree of protection		IP20
Note on materials		RoHS-compliant
Fieldbus link		1x CANopen Slave
Number of digital logic inputs		8
Note on power failure buffering		Digital logic inputs/outputs are only available in I/O mode.
Controller operating mode		Direct operation Set selection
Nominal voltage for logic power supply DC		24 V
Nominal voltage load voltage DC		48 V
Permissible range for load power supply		± 10 %
Max. current consumption, logic power supply with clamping brake and I/O		0,9 A
Note on nominal operating voltage of load voltage supply DC		Integrated braking resistor
Nominal current, load supply		10 A
Current rating per output		100 mA
Note on braking resistor		The 10 ms are not complied with if a brake is integrated.
Ethernet, number		1
Vibration resistance test		EN 60068-2-6
Protection class		III
Control methods		I/O standalone CAN bus TCP/IP
Max. fieldbus transmission rate		100 Mbit/s
Supported kinematic		Planar surface gantry EXCM
Dimensions (W x L x H)		50 x 149 x 130 mm
Configuration support		FCT (Festo Configuration Tool)
Protocol		CANopen FHPP Modbus® TCP
LED display, bus-specific		Device: operating status Com: Communication status
Safety function		Safe torque off (STO)
Safety Integrity Level (SIL)		Safe torque off (STO)/SIL 3
SFF Safe Failure Fraction		99 %
Certified for safety function to ISO 13849 and IEC 61508 (SIL)		Product can be used in SRP/CS up to SIL 3 (high demand)
Duration of use Tm		20 y
Features of digital logic outputs		Not galvanically isolated