Festo 4080496 linear drive

CPX-E-PB

$865.87 1 pcs. with 1 to 3 days delivery to United States

Specifications

Dimensions 42.2 x 125.8 x 76.5 mm
Weight 145g
Dimensions (W x L x H) 42.2 x 125.8 x 76.5 mm
Diagnostics via LED Bus fault Force mode Power supply, electronics/sensors Load power supply System fault
Configuration support GSD file
System parameters Diagnostic memory Fail-safe response Force mode System start
Operator controls DIL switch
Max. power supply 8 A
Power failure bridging 20 ms
Power supply, function Electronics and sensors
power supply, connection system Spring-loaded terminal
Power supply, connection pattern 995,847
Power supply, note on conductor diameter 0.2 - 2.5 mm² for flexible conductors without wire end sleeves
KC mark KC-EMV
Certificate issuing authority UL E239998
Shock resistance Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27
Storage temperature -20 °C ... 70 °C
Protection against direct and indirect contact PELV
Ambient temperature -5 °C ... 50 °C
Product weight 145 g
Note on outputs 62 bytes with I/O diagnostic interface 64 bytes with status bits 64 bytes without diagnostics
Note on inputs 62 bytes with I/O diagnostic interface 63 bytes with status bits 64 bytes without diagnostics
Field bus interface, transmission rate 1.5 Mbps 12 Mbit/s 187.5 kbit/s 19.2 kbit/s 3 Mbit/s 500 kbit/s 6 Mbit/s 9.6 kbit/s 93.75 kbit/s
Fieldbus interface, function Bus connection incoming/outgoing
Field bus, connection system Sub-D
Field bus, protocol PROFIBUS DP
Fieldbus interface, max. address volume for inputs 64 Byte
Service interface, function Diagnostics and parameterisation
Service interface, connection technology USB 2.0 type B mini
Service interface, connection pattern 995,868
Note on materials Contains paint-wetting impairment substances RoHS-compliant
Grid dimension 18,9 mm
Diagnostics via bus Wire break Short circuit Parameterisation error Overflow buffer Upper limit value violated Transmission error Lower limit value not observed Undervoltage Watchdog/I/O status Requested function not supported Not ready for data exchange
Max. number of modules 10
Module parameters Undervoltage diagnostics Process value representation of analogue modules
Intrinsic current consumption at nominal operating voltage for electronics/sensors Typically 75 mA
Nominal DC operating voltage, electronics/sensors 24 V
Permissible voltage fluctuations for electronics/sensors ± 25%
Power supply, connection type Terminal strip
Power supply, number of pins/wires 4
Power supply, conductor diameter 0,2 mm² ... 1,5 mm²
Approval RCM trademark c UL us listed (OL)
CE mark (see declaration of conformity) To EU EMC Directive
Vibration resistance Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6
Corrosion resistance class CRC 0 - No corrosion stress
Relative air humidity 95 % Non-condensing
Degree of protection IP20
Note on ambient temperature -5 - 60°C for vertical installation
Max. address volume, outputs 64 Byte
Max. address volume, inputs 64 Byte
Field bus interface, electrical isolation yes
Fieldbus interface PROFIBUS
Field bus, connection type Socket
Field bus, connection pattern 9
Fieldbus interface, connection pattern 995,638
Fieldbus interface, max. address volume for outputs 64 Byte
Service interface, connection type Socket
Service interface, number of pins/wires 5
Type of mounting With H-rail
Material housing PA
$865.87
Stock 1 pcs.
Part number 4080496
Manufacturer Festo
Quantity Unit Price
1+ $865.87
  • Open Registration
    Create your account instantly
  • Support 24/7
    Ask us anytime
  • 100% Safety
    Only secure payments: bank transfer, credit card and PayPal
  • Volume Discounts
    Optimize your supplies