| Dimensions (W x L x H) | (incl. interlinking block) 50 x 107 x 50 mm | ||
| Device-specific diagnostics | Channel-oriented and module-oriented diagnostics Undervoltage of modules Diagnostic memory | ||
| Additional functions | System status can be mapped using process data Additional diagnostic interface for operator units | ||
| Baud rate | 156 ... 10000 kbit/s | ||
| Intern power consumption nominal operating voltage | Typ. 70 mA | ||
| Corrosion resistance class CRC | 1 - Low corrosion stress | ||
| Degree of protection | IP65 IP67 | ||
| Product weight | 115 g | ||
| Note on outputs | 14 bytes with Ry (F23) 32 bytes with RWw (F23) 64 bytes on Ry, RWw (F24) | ||
| Note on inputs | 14 bytes on Rx (F23) 32 bytes on RWr (F23) 64 bytes on Rx, RWr (F24) | ||
| LED display, bus-specific | Error: Communication error RD: Receive data Run: Communication status SD: Send data | ||
| Material housing | PA-reinforced PC |
| Field bus interface | Sub-D socket, 9-pin Sub-D plug connector, for self-assembly Screw terminal strip, IP20 | ||
| Parameterisation | Diagnostic behaviour Fail-safe response Forcing of channels Signal setup System parameter | ||
| Operator controls | DIL switch | ||
| Operational voltage range DC | 18 V ... 30 V | ||
| Nominal operating voltage DC | 24 V | ||
| Storage temperature | -20 °C ... 70 °C | ||
| Ambient temperature | -5 °C ... 50 °C | ||
| Max. address volume, outputs | 32 Byte | ||
| Max. address volume, inputs | 64 Byte | ||
| Protocol | CC-Link | ||
| LED display, product-specific | M: Modify, parameterisation PL: Load supply PS: Electronics supply, sensor supply SF: System fault |
