Dimensions (W x L x H) | (incl. interlinking block) 50 x 107 x 50 mm | ||
Device-specific diagnostics | Channel-oriented and module-oriented diagnostics Undervoltage of modules Diagnostic memory | ||
Configuration support | ESI file | ||
Operator controls | DIL switch | ||
Operational voltage range DC | 18 V ... 30 V | ||
Nominal operating voltage DC | 24 V | ||
Storage temperature | -20 °C ... 70 °C | ||
Ambient temperature | -5 °C ... 50 °C | ||
Max. address volume, outputs | 128 Byte | ||
Protocol | EtherCAT | ||
LED display, product-specific | M: Modify, parameterisation PL: Load supply PS: Electronics supply, sensor supply SF: System fault | ||
Material housing | PA-reinforced |
Field bus interface | 2x socket, M12x1, 4-pin, D-coded | ||
Parameterisation | Diagnostic behaviour Fail-safe response Forcing of channels Signal setup System parameter | ||
Additional functions | Acyclic data access via fieldbus Diagnostics object Emergency message Compatibility mode for the FB38 Modular device profile (MDP) System status can be mapped using process data Variable PDO mapping Additional diagnostic interface for operator units | ||
Baud rate | 100 Mbit/s | ||
Intern power consumption nominal operating voltage | Typically 100 mA | ||
Corrosion resistance class CRC | 1 - Low corrosion stress | ||
Degree of protection | IP65 IP67 | ||
Product weight | 125 g | ||
Max. address volume, inputs | 128 Byte | ||
LED display, bus-specific | Error: Communication error LA X1: network active port 1 LA X2: Network active port 2 Run: Communication status | ||
Note on materials | RoHS-compliant |