| Nominal size | 8,65 mm | ||
| Mounting position | optional | ||
| Design | Push-pull principle | ||
| Temperature-dependent operating pressure | -0,95 bar ... 15 bar | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Suitable for use with food | See supplementary material information | ||
| Nominal torque | 2,5 Nm | ||
| Product weight | 12 g | ||
| Pneumatic connection, port 2 | For pipe/tubing outside diameter of 12 mm | ||
| Material housing | POM | ||
| Material tubing clamp component | High-alloy stainless steel |
| Type of seal on screw-in stud | Sealing ring | ||
| Size of pack | 1 | ||
| Operating pressure complete temperature range | -0,95 bar ... 7 bar | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] | ||
| Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
| Ambient temperature | -25 °C ... 70 °C | ||
| Tolerance for nominal tightening torque | ± 10% | ||
| Pneumatic connection, port 1 | Male thread G1/2 | ||
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
| Material release ring | POM |
