Festo 533485 linear drive

DAPS-0030-090-RS2-F0507

$420.72 Limited stock only available on quotation

Specifications

Operating Pressure 3,5 bar ... 8,4 bar
Mounting Position optional
Pneumatic connection G1/8
Weight 1.95Kg
Size of valve actuator 30
Swivel angle 90 deg
End-position adjustment range at nominal swivel angle 81 deg ... 91 deg
Note on end-position adjusting range One end position optionally adjustable
Cushioning No cushioning
Mode of operation Single-acting
Position detection Without
Symbol 991,266
Safety Integrity Level (SIL) Up to SIL 2 High Demand mode To SIL 2 Low Demand mode
Operating pressure 3,5 bar ... 8,4 bar
CE mark (see declaration of conformity) To EU Explosion Protection Directive (ATEX)
Explosion protection Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
ATEX category dust II 2D
Explosion ignition protection type for dust Ex h IIIC T85°C...T200°C Db X
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Corrosion resistance class CRC 3 - high corrosion stress
Torque at nominal operating pressure and 0° swivel angle 37,6 Nm
Torque at nominal operating pressure and 90° swivel angle 31,3 Nm
Spring return torque at 0° swivel angle 12,5 Nm
Spring return torque at 90° swivel angle 18,8 Nm
Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° 1,19 l
Shaft connection T14
Note on materials RoHS-compliant
Material seals FPM NBR PUR
Material screws High-alloy steel
Material number shaft 1.43
Flange hole pattern F05 F07
End-position adjustment range at 0° -1 deg ... 9 deg
Shaft connection depth 16,5 mm
Fitting connection conforms to standard ISO 5211
Mounting position optional
Design Scotch yoke system
Closing direction Closes to the right
Valve connection conforms to standard VDI/VDE 3845 (NAMUR)
Supply pressure for spring strength 3,5 bar
Nominal operating pressure 5,6 bar
CE marking (see declaration of conformity) To UK EX instructions
ATEX category gas II 2G
Explosion ignition protection type for gas Ex h IIC T6...T3 Gb X
Explosion ambient temperature -20°C <= Ta <= +60°C
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Ambient temperature -20 °C ... 80 °C
Torque at nominal operating pressure and 50° swivel angle 20,7 Nm
Note on torque The operating torque of the actuator must not be higher than the maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling.
Spring return torque at 50° swivel angle 9,4 Nm
Spring strength 2
Product weight 1.950 g
Pneumatic connection G1/8
Material cover Wrought aluminium alloy
Material housing Wrought aluminium alloy
Material shaft High-alloy steel
$420.72
Stock Ask for quotation
Part number 533485
Manufacturer Festo
Quantity Unit Price
1+ $420.72
  • Open Registration
    Create your account instantly
  • Support 24/7
    Ask us anytime
  • 100% Safety
    Only secure payments: bank transfer, credit card and PayPal
  • Volume Discounts
    Optimize your supplies