| Distance from centre of gravity of load to yoke plate xs | 5 mm | ||
| Material housing | Wrought aluminium alloy | ||
| Material cover | Wrought aluminium alloy | ||
| Product weight | 12,5 g | ||
| Moving mass for 0 mm stroke | 3,2 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 7,5 N | ||
| Max. effective load dependent upon stroke at defined distance xs | 1,7 N | ||
| Impact energy in end positions | 0,006 J | ||
| LABS (PWIS) conformity | VDMA24364-B2-L | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Mode of operation | Double-acting | ||
| Operating pressure | 3,5 bar ... 7 bar | ||
| Position detection | Without | ||
| Guide | Plain-bearing guide | ||
| Cushioning | Elastic cushioning rings/plates at both ends | ||
| Piston diameter | 4 mm |
| Material piston rod | High-alloy stainless steel | ||
| Material seals | NBR | ||
| Pneumatic connection | PK-2 | ||
| Additional moving mass per 10 mm stroke | 1,3 g | ||
| Moving mass | 3,2 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 5,5 N | ||
| Max. moment Mx | 0,02 Nm | ||
| Ambient temperature | -5 °C ... 60 °C | ||
| Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Max. speed | 1 m/s | ||
| Symbol | 991,738 | ||
| Design | Guidance | ||
| Mounting position | optional | ||
| Operating mode, drive unit | Yoke | ||
| Stroke | 10 mm |
