Stroke | 20 mm ... 400 mm | ||
Operating mode, drive unit | Yoke | ||
Mounting position | optional | ||
Design | Guidance | ||
Variants | Heat-resistant seals max. 120°C | ||
Mode of operation | Double-acting | ||
CE marking (see declaration of conformity) | To UK EX instructions | ||
ATEX category gas | II 2G | ||
Explosion ambient temperature | -20°C <= Ta <= +70°C | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
LABS (PWIS) conformity | VDMA24364-B1/B2-L | ||
Impact energy in end positions | 0,15 J ... 0,3 J | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 295 N | ||
Pneumatic connection | G1/8 | ||
Material cover | Wrought aluminium alloy | ||
Material housing | Wrought aluminium alloy |
Piston diameter | 25 mm | ||
Cushioning | Elastic cushioning rings/plates at both ends Pneumatic cushioning, adjustable at both ends Shock absorber, soft characteristic curve | ||
Guide | Plain-bearing guide Recirculating ball bearing guide | ||
Position detection | Via proximity switch | ||
Operating pressure | 1,5 bar ... 10 bar | ||
CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) | ||
Explosion ignition protection type for gas | Ex h IIC T4 Gb | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Corrosion resistance class CRC | 0 - No corrosion stress 2 - Moderate corrosion stress | ||
Ambient temperature | -20 °C ... 120 °C | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 247 N | ||
alternative connections | See product drawing | ||
Note on materials | RoHS-compliant | ||
Material seals | NBR | ||
Material piston rod | High-alloy stainless steel |