Material housing | Wrought aluminium alloy Hard anodised | ||
Size | 10 | ||
Max. opening angle | 40 deg | ||
Repetition accuracy, gripper | ≤ 0,04 mm | ||
Mounting position | optional | ||
Gripper function | Angle | ||
Position detection | Via Hall sensor | ||
Operating pressure | 2 bar ... 8 bar | ||
Min. opening time at 0.6 MPa (6 bar, 87 psi) | 10 ms | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Corrosion resistance class CRC | 1 - Low corrosion stress | ||
Ambient temperature | 5 °C ... 60 °C | ||
Total gripper torque, closing, 0.6 MPa (6 bar, 87 psi) | 30 Ncm | ||
Max. force on gripper jaw Fz static | 25 N | ||
Max. torque at gripper My static | 0,6 Nm | ||
Product weight | 40 g | ||
Pneumatic connection | M3 | ||
Material cover cap | PA |
Material gripper jaws | High-alloy steel | ||
Max. replacement accuracy | ≤ 0,2 mm | ||
Rotationally symmetrical | ≤ 0,2 mm | ||
Number of gripper jaws | 2 | ||
Mode of operation | Double-acting | ||
Design | Lever | ||
Symbol | 00991894 | ||
Max. operating frequency of gripper | ≤ 4 Hz | ||
Min. closing time at 0.6 MPa (6 bar, 87 psi) | 22 ms | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Suitability for the production of Li-ion batteries | Metals with more than 5% copper by mass are excluded from use. Exceptions are printed circuit boards, cables, electrical plug connectors and coils | ||
Total gripping torque at 0.6 MPa (6 bar, 87 psi), opening | 43 Ncm | ||
Mass moment of inertia | 0,03 kgcm² | ||
Max. torque at gripper Mx static | 0,6 Nm | ||
Max. torque at gripper Mz static | 0,6 Nm | ||
Type of mounting | Via female thread and centring sleeve Via through-hole and centring sleeve Either: | ||
Note on materials | RoHS-compliant |