Stroke | 10 mm ... 2.000 mm | ||
Stroke Smart Softstop | 100 mm ... 500 mm | ||
Smallest positioning stroke | 3% of max. stroke Max. 20 mm | ||
Based on standard | ISO 15552 (previously also VDMA 24562, ISO 6431, NF E49 003.1, UNI 10290) | ||
Positioning installation position | optional | ||
Functional principle of measuring system | Digital | ||
Position detection | Via proximity switch With integrated displacement encoder | ||
Protection against torque/guide | Dual flat piston rod | ||
Operating pressure positioning/Soft Stop | 4 bar ... 8 bar | ||
Min. travel speed | 0,05 m/s | ||
Typical positioning time long stroke, horizontal | 0.45/0.7 s | ||
Nominal operating voltage DC | 5 V | ||
CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | ||
Continuous shock resistance to DIN/IEC 68 Part 2-82 | Tested to severity level 2 | ||
LABS (PWIS) conformity | VDMA24364-B1/B2-L | ||
Degree of protection | IP65 To IEC 60529 | ||
Ambient temperature | -20 °C ... 80 °C | ||
Max. torque for protection against torsion | ≤ 0,05 Nm | ||
Max. working load, vertical | 15 kg | ||
Min. working load, vertical | 3 kg | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 415 N ... 483 N | ||
Additional moving mass per 10 mm stroke | 8 g | ||
Additional weight per 10 mm stroke | 30 g | ||
Repetition accuracy in ± mm | 0,5 mm | ||
Max. controllable force during return stroke | 374 N | ||
Repetition accuracy Soft Stop intermediate position | +/-2 mm | ||
Cable length | 1,5 m | ||
Pneumatic connection | G1/8 | ||
Material cover | Wrought aluminium alloy | ||
Material cable sheath | TPE-U(PUR) | ||
Material screws | Steel | ||
Material sensor head | POM | ||
Material cylinder barrel | Wrought aluminium alloy |
Stroke Servopneumatic positioning | 100 mm ... 500 mm | ||
Stroke reduction at end positions | >= 10 mm | ||
Piston diameter | 32 mm | ||
Cushioning | Elastic cushioning rings/plates at both ends | ||
Soft Stop installation position | Optional | ||
Design | Piston Piston rod Profile barrel | ||
Variants | Clamping unit attached Extended piston rod Piston rod at one end With two measuring heads | ||
Operating pressure | ≤ 174 psi | ||
Max. travel speed | > 1,5 m/s | ||
Typical positioning time short stroke, horizontal | 0.35/0.55 s | ||
Mode of operation | Double-acting | ||
CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive | ||
Operating medium | Compressed air to ISO 8573-1:2010 [6:4:4] | ||
Corrosion resistance class CRC | 1 - Low corrosion stress | ||
Max. magnetic interference field | 10 KA/m at a distance of 100 mm | ||
Vibration resistance to DIN/IEC 68 Part 2-6 | Tested to severity level 2 | ||
Impact energy in end positions | 0,1 J | ||
Max. working load, horizontal | 45 kg | ||
Min. working load, horizontal | 3 kg | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 415 N | ||
Moving mass for 0 mm stroke | 95 g | ||
Basic weight for 0 mm stroke | 521 g | ||
Output signal | Analogue | ||
Max. controllable force during advance stroke | 435 N | ||
Typical friction force | 35 N | ||
Electrical connection encoder | 8-pin | ||
Type of mounting | With accessories | ||
Note on materials | RoHS-compliant | ||
Material seals | NBR TPE-U(PU) | ||
Material piston rod | High-alloy steel | ||
Material sensor cover | Aluminium | ||
Material connector housing | PBT | ||
Mean time to failure (MTTF), subcomponent | 4761 years, sensor |