1463250 Festo

Festo 1463250 standards-based cylinder

Name: 1463250 Festo
Brand: Festo
SKU: 711481-en-usd
Price: 284.53 USD
Availability: InStock

DSBC-32-37-PPVA-N3-130E

$284.53 1 pcs. with 1 to 3 days delivery to United States

Specifications

Series (DSBC)	Standards-based cylinder, double-acting, based on ISO 15552
Protection against rotation	None
Running characteristics	Standard
Piston diameter [mm] (32)	32
Stroke [mm] (37)	37
Clamping unit	None
End-position locking	None
Piston rod type	At one end
Piston rod thread type	Male thread
Profi le type	Sensor slot on one profi le side only
Cushioning (PPV)	Pneumatic cushioning, adjustable at both ends

Position sensing (A)	For proximity sensor
Standard	N3 In accordance with ISO
Corrosion protection	Standard
Temperature range	Standard
Protection against particles	Standard
Scraper variant	None
Special material properties	None
EU certification	None
Piston rod extension	None
Piston rod thread extension	None

Technical data

Mode of operation		Double-acting
Piston diameter		32 mm
Torsional backlash at piston rod +/-		-0,65 deg ... 0,65 deg
Cushioning		Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends
Conforms to standard		ISO 15552
Design		Piston Piston rod Profile barrel
Symbol		00991217 00991218 00991235 00991237 00991257 00991258 00991907 00991910 00992970 00992971
Mode of operation clamping unit		Retracting Advancing Static Released through compressed air Frictional clamping with spring force
Axial backlash clamping unit		0,5 mm
Mode of operation end-position locking		Positive interlocking with stop cylinder Released through compressed air
Axial backlash end-position locking		1,3 mm
Locking pressure		≤ 0,5 bar
CE mark (see declaration of conformity)		To EU Explosion Protection Directive (ATEX)
Explosion protection		Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
ATEX category dust		II 2D
Explosion ignition protection type for dust		Ex h IIIC T120°C Db
Explosion protection certification outside the EU		EPL Db (GB) EPL Gb (GB)
Note on operating and pilot medium		Lubricated operation possible (in which case lubricated operation will always be required)
Ambient temperature		-40 °C ... 150 °C
Cushioning length		0 mm ... 17 mm
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke		415 N
Moving mass for 0 mm stroke		91 g ... 231 g
Basic weight for 0 mm stroke		453 g ... 917 g
Additional weight per piston rod extension of 10 mm		9 g
Type of mounting		Via female thread With accessories Either:
Note on materials		Contains paint-wetting impairment substances RoHS-compliant
Material spring		Spring steel High-alloy stainless steel
Material housing end-position locking		Anodised wrought aluminium alloy
Material clamping jaws clamping unit		Brass
Material piston end-position locking		High-alloy steel
Material piston rod		High-alloy stainless steel, hard chrome-plated High-alloy steel High-alloy stainless steel
Buffer seal material		FPM TPE-U(PU)
Material cylinder barrel		Smooth-anodised wrought aluminium alloy
Material rod wiper		Brass PTFE reinforced
Material collar screws		Galvanised steel

Stroke		1 mm ... 2.800 mm
Piston rod thread		M6 M10x1.25
Based on standard		ISO 15552
Mounting position		optional
Piston-rod end		Male thread Female thread
Position detection		Via proximity switch
Variants		For unlubricated operation Clamping unit attached End-position locking at both ends End-position locking with piston rod in retracted position End-position locking with piston rod in advanced position Increased chemical resistance Bellows on bearing cap Hard scraper Extended male piston rod thread Piston rod with female thread Extended piston rod Low friction for balancer applications Metal scraper With protection against rotation Uniform, slow movement Low friction Through piston rod Heat-resistant seals max. 120°C Sensor slots on 3 profile sides Temperature range 0 to 150°C Temperature range -40 to 80°C Piston rod at one end
Static holding force of clamping unit		600 N
Clamping unit release pressure		3 bar
Static holding force of end-position locking		500 N
Unlocking pressure		≥ 2,5 bar
Operating pressure		0,1 bar ... 12 bar
CE marking (see declaration of conformity)		To UK EX instructions
ATEX category gas		II 2G
Explosion ignition protection type for gas		Ex h IIC T4 Gb
Explosion ambient temperature		-20°C <= Ta <= +60°C
Operating medium		Compressed air to ISO 8573-1:2010 [7:4:4]
Corrosion resistance class CRC		2 - Moderate corrosion stress 3 - high corrosion stress
Impact energy in end positions		0,1 J ... 0,4 J
Max. torque for protection against torsion		0,8 Nm
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke		415 N ... 483 N
Additional moving mass per 10 mm stroke		8 g ... 18 g
Additional weight per 10 mm stroke		26 g ... 41 g
Additional weight per piston rod thread extension of 10 mm		6 g
Pneumatic connection		G1/8
Material cover		Die-cast aluminium, coated
Clamping unit housing material		Anodised wrought aluminium alloy
Material piston seal		FPM HNBR TPE-U(PU)
Piston clamping unit material		POM
Material piston		Wrought aluminium alloy
Material piston rod wiper		FPM HNBR PE TPE-U(PU)
Cushioning piston material		Aluminium POM
Material nut		Galvanised steel
Material bearing		Bronze Metal polymer compound POM
Material bellows		NBR PA