1461995 Festo

Festo 1461995 standards-based cylinder

Name: 1461995 Festo
Brand: Festo
SKU: 756096-en-usd
Price: 406.34 USD
Availability: InStock

DSBC-Q-40-200-D3-PPSA-N3

$406.34 1 pcs. with 1 to 3 days delivery to United States

Specifications

Series (DSBC)	Standards-based cylinder, double-acting, based on ISO 15552
Protection against rotation (Q)	With protection against rotation
Running characteristics	Standard
Piston diameter [mm] (40)	40
Stroke [mm] (200)	200
Clamping unit	None
End-position locking	None
Piston rod type	At one end
Piston rod thread type	Male thread
Profi le type (D3)	Sensor slots on 3 profi le sides
Cushioning (PPS)	Pneumatic cushioning, self-adjusting at both ends

Position sensing (A)	For proximity sensor
Standard	N3 In accordance with ISO
Corrosion protection	Standard
Temperature range	Standard
Protection against particles	Standard
Scraper variant	None
Special material properties	None
EU certification	None
Piston rod extension	None
Piston rod thread extension	None

Technical data

CE mark (see declaration of conformity)		To EU Explosion Protection Directive (ATEX)
Piston diameter		40 mm
Torsional backlash at piston rod +/-		-0,6 deg ... 0,6 deg
Cushioning		Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends
Conforms to standard		ISO 15552
Design		Piston Piston rod Profile barrel
Symbol		00991217 00991218 00991235 00991237 00991257 00991258 00991907 00991910 00992970 00992971
Static holding force of clamping unit		1.000 N
Clamping unit release pressure		3 bar
Static holding force of end-position locking		500 N
Unlocking pressure		≥ 2,5 bar
Operating pressure		0,1 bar ... 12 bar
CE marking (see declaration of conformity)		To UK EX instructions
ATEX category gas		II 2G
Explosion ignition protection type for gas		Ex h IIC T4 Gb
Explosion ambient temperature		-20°C <= Ta <= +60°C
Operating medium		Compressed air to ISO 8573-1:2010 [7:4:4]
Corrosion resistance class CRC		2 - Moderate corrosion stress 3 - high corrosion stress
Impact energy in end positions		0,2 J ... 0,7 J
Max. torque for protection against torsion		1,1 Nm
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke		633 N ... 754 N
Additional moving mass per 10 mm stroke		11 g ... 32 g
Additional weight per 10 mm stroke		32 g ... 65 g
Additional weight per piston rod thread extension of 10 mm		8 g
Pneumatic connection		G1/4
Material cover		Die-cast aluminium, coated
Clamping unit housing material		Anodised wrought aluminium alloy
Material piston seal		FPM HNBR TPE-U(PU)
Piston clamping unit material		POM
Material piston		Wrought aluminium alloy
Material piston rod wiper		FPM HNBR PE TPE-U(PU)
Cushioning piston material		Aluminium POM
Material nut		Galvanised steel
Material bearing		Bronze Metal polymer compound POM
Material bellows		NBR PA

Stroke		1 mm ... 2.800 mm
Piston rod thread		M8 M12x1.25
Based on standard		ISO 15552
Mounting position		optional
Piston-rod end		Male thread Female thread
Position detection		Via proximity switch
Mode of operation clamping unit		Retracting Advancing Static Released through compressed air Frictional clamping with spring force
Axial backlash clamping unit		0,5 mm
Mode of operation end-position locking		Positive interlocking with stop cylinder Released through compressed air
Axial backlash end-position locking		1,3 mm
Locking pressure		≤ 0,5 bar
Mode of operation		Double-acting
Explosion protection		Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
ATEX category dust		II 2D
Explosion ignition protection type for dust		Ex h IIIC T120°C Db
Explosion protection certification outside the EU		EPL Db (GB) EPL Gb (GB)
Note on operating and pilot medium		Lubricated operation possible (in which case lubricated operation will always be required)
Ambient temperature		-40 °C ... 150 °C
Cushioning length		0 mm ... 19 mm
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke		633 N
Moving mass for 0 mm stroke		151 g ... 424 g
Basic weight for 0 mm stroke		721 g ... 1.401 g
Additional weight per piston rod extension of 10 mm		16 g
Type of mounting		Via female thread With accessories Either:
Note on materials		Contains paint-wetting impairment substances RoHS-compliant
Material spring		Spring steel High-alloy stainless steel
Material housing end-position locking		Anodised wrought aluminium alloy
Material clamping jaws clamping unit		Brass
Material piston end-position locking		High-alloy steel
Material piston rod		High-alloy stainless steel, hard chrome-plated High-alloy steel High-alloy stainless steel
Buffer seal material		FPM TPE-U(PU)
Material cylinder barrel		Smooth-anodised wrought aluminium alloy
Material rod wiper		Brass PTFE reinforced
Material collar screws		Galvanised steel