| Stroke | 1 mm ... 2.800 mm | ||
| Piston rod thread | M6 M10x1.25 | ||
| Mounting position | optional | ||
| Piston-rod end | Male thread Female thread | ||
| Position detection | Via proximity switch | ||
| Variants | For unlubricated operation Increased chemical resistance Hard scraper Extended male piston rod thread Piston rod with female thread Extended piston rod Uniform, slow movement Low friction Through piston rod Heat-resistant seals max. 120°C Temperature range 0 to 150°C Temperature range -40 to 80°C | ||
| Mode of operation | Double-acting | ||
| CE marking (see declaration of conformity) | To UK EX instructions | ||
| ATEX category gas | II 2G | ||
| Explosion ignition protection type for gas | Ex h IIC T4 Gb | ||
| Explosion ambient temperature | -20°C <= Ta <= +60°C | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Corrosion resistance class CRC | 3 - high corrosion stress | ||
| Ambient temperature | -40 °C ... 150 °C | ||
| Cushioning length | 16 mm ... 17 mm | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 415 N ... 483 N | ||
| Additional moving mass per 10 mm stroke | 9 g ... 18 g | ||
| Additional weight per 10 mm stroke | 28 g ... 35 g | ||
| Pneumatic connection | G1/8 | ||
| Material cover | Die-cast aluminium, coated | ||
| Material piston | Wrought aluminium alloy | ||
| Material piston rod wiper | FPM PE TPE-U(PU) | ||
| Cushioning piston material | Aluminium POM | ||
| Material nut | High-alloy stainless steel | ||
| Material bearing | Bronze Metal polymer compound POM |
| Piston diameter | 32 mm | ||
| Cushioning | Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends | ||
| Conforms to standard | ISO 15552 | ||
| Design | Piston Piston rod Profile barrel | ||
| Symbol | 00991217 00991218 00991235 00991237 00992970 00992971 | ||
| Operating pressure | 0,1 bar ... 12 bar | ||
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
| Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
| ATEX category dust | II 2D | ||
| Explosion ignition protection type for dust | Ex h IIIC T120°C Db | ||
| Explosion protection certification outside the EU | EPL Db (GB) EPL Gb (GB) | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Suitable for use with food | See supplementary material information | ||
| Impact energy in end positions | 0,2 J ... 0,4 J | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 415 N | ||
| Moving mass for 0 mm stroke | 108 g ... 179 g | ||
| Basic weight for 0 mm stroke | 472 g ... 588 g | ||
| Type of mounting | Via female thread With accessories Either: | ||
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
| Material piston seal | FPM TPE-U(PU) | ||
| Material piston rod | High-alloy stainless steel | ||
| Buffer seal material | FPM TPE-U(PU) | ||
| Material cylinder barrel | Anodised wrought aluminium alloy | ||
| Material rod wiper | PTFE reinforced | ||
| Material collar screws | Galvanised steel |
