| Material swivel mounting | Painted spheroidal graphite cast iron | ||
| Material tie rod | High-alloy steel High-alloy stainless steel | ||
| Material bearing | Bronze Metal polymer compound POM | ||
| Material nut | Galvanised steel High-alloy stainless steel | ||
| Cushioning piston material | Wrought aluminium alloy POM | ||
| Material piston rod wiper | FPM HNBR PE TPE-U(PU) | ||
| Material piston | Wrought aluminium alloy | ||
| Material cover | Die-cast aluminium, coated | ||
| Pneumatic connection | G1/2 | ||
| Additional weight per piston rod thread extension of 10 mm | 41 g | ||
| Additional weight per 10 mm stroke | 143 g ... 206 g | ||
| Additional moving mass per 10 mm stroke | 56 g ... 126 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 6.881 N ... 7.363 N | ||
| Cushioning length | 42 mm | ||
| Ambient temperature | -40 °C ... 150 °C | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Explosion protection certification outside the EU | EPL Db (GB) EPL Gb (GB) | ||
| Explosion ignition protection type for dust | Ex h IIIC T120°C Db | ||
| ATEX category dust | II 2D | ||
| Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
| Operating pressure | 0,05 bar ... 10 bar | ||
| Symbol | 00991217 00991218 00991235 00991237 00992970 00992971 | ||
| Design | Piston Piston rod Tie rod Cylinder barrel | ||
| Conforms to standard | ISO 15552 | ||
| Cushioning | Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends | ||
| Piston rod thread | M16 M16x1.5 M20 M20x1.5 M24 M27 M27x2 | ||
| Stroke | 1 mm ... 2.800 mm |
| Material spacer bolt | High-alloy stainless steel | ||
| Material collar nut | Galvanised steel | ||
| Material rod wiper | Brass PTFE reinforced | ||
| Material cylinder barrel | Smooth-anodised wrought aluminium alloy | ||
| Buffer seal material | FPM TPE-U(PU) | ||
| Material piston rod | High-alloy stainless steel, hard chrome-plated High-alloy steel High-alloy stainless steel | ||
| Material piston seal | FPM HNBR TPE-U(PU) | ||
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
| Type of mounting | Via female thread With accessories Either: | ||
| Additional weight per piston rod extension of 10 mm | 63 g | ||
| Basic weight for 0 mm stroke | 6.389 g ... 13.699 g | ||
| Moving mass for 0 mm stroke | 2.023 g ... 3.874 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 6.881 N | ||
| Impact energy in end positions | 2,5 J | ||
| Corrosion resistance class CRC | 2 - Moderate corrosion stress 3 - high corrosion stress | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Explosion ambient temperature | -20°C <= Ta <= +60°C | ||
| Explosion ignition protection type for gas | Ex h IIC T4 Gb | ||
| ATEX category gas | II 2G | ||
| CE marking (see declaration of conformity) | To UK EX instructions | ||
| Mode of operation | Double-acting | ||
| Variants | For unlubricated operation Bellows on bearing cap Hard scraper Extended male piston rod thread Piston rod with female thread Custom thread on the piston rod Extended piston rod Low friction for balancer applications Metal scraper With protection against rotation Uniform, slow movement Low friction Through piston rod Heat-resistant seals max. 120°C Variable spacer bolt length Temperature range 0 to 150°C Temperature range -40 to 80°C Shortened male piston rod thread Piston rod at one end | ||
| Position detection | Via proximity switch | ||
| Piston-rod end | Male thread Female thread | ||
| Mounting position | optional | ||
| Based on standard | ISO 15552 | ||
| Piston diameter | 125 mm |
