| Material swivel mounting | Painted spheroidal graphite cast iron | ||
| Material tie rod | High-alloy steel High-alloy stainless steel | ||
| Material bearing | Bronze Metal polymer compound | ||
| Material nut | Galvanised steel High-alloy stainless steel | ||
| Cushioning piston material | Wrought aluminium alloy POM | ||
| Material piston rod wiper | FPM NBR | ||
| Material piston | Cast aluminium | ||
| Material cover | Cast aluminium, coated | ||
| Pneumatic connection | G3/4 | ||
| Basic weight for 0 mm stroke | 11.751 g | ||
| Moving mass for 0 mm stroke | 4.292 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 11.310 N | ||
| Ambient temperature | -20 °C ... 150 °C | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Explosion ambient temperature | -20°C <= Ta <= +60°C | ||
| Explosion ignition protection type for gas | c T4 | ||
| ATEX category gas | II 2G | ||
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
| Operating pressure | 0,6 bar ... 10 bar | ||
| Symbol | 00991217 00991218 00991235 00991237 | ||
| Design | Piston Piston rod Tie rod Cylinder barrel | ||
| Conforms to standard | ISO 15552 | ||
| Cushioning | Elastic cushioning rings/plates at both ends Pneumatic cushioning, adjustable at both ends | ||
| Piston rod thread | M16 M16x1.5 M20 M20x1.5 M24 M27 M27x2 M30x2 M36 M36x2 | ||
| Stroke | 1 mm ... 2.700 mm |
| Material spacer bolt | High-alloy steel High-alloy stainless steel | ||
| Material collar nut | Galvanised steel | ||
| Material rod wiper | Brass | ||
| Material cylinder barrel | Smooth-anodised wrought aluminium alloy | ||
| Buffer seal material | FPM TPE-U(PU) | ||
| Material piston rod | High-alloy stainless steel, hard chrome-plated High-alloy steel High-alloy stainless steel | ||
| Material piston seal | FPM NBR | ||
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
| Additional weight per 10 mm stroke | 97 g | ||
| Additional moving mass per 10 mm stroke | 208 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 12.064 N | ||
| Cushioning length | 48 mm | ||
| Corrosion resistance class CRC | 2 - Moderate corrosion stress 3 - high corrosion stress | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Explosion ignition protection type for dust | c T120°C | ||
| ATEX category dust | II 2D | ||
| Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
| Mode of operation | Double-acting | ||
| Variants | Extended male piston rod thread Piston rod with female thread Custom thread on the piston rod Extended piston rod Metal scraper High corrosion protection Through piston rod Heat-resistant seals max. 120°C Clamped swivel mounting position Screwed-on swivel mounting position Spacer bolt on end cap side Spacer bolt on both sides Spacer bolt on bearing cap side Variable spacer bolt length Temperature range 0 to 150°C Shortened male piston rod thread Piston rod at one end For proximity switch | ||
| Position detection | Via proximity switch | ||
| Piston-rod end | Male thread Female thread | ||
| Mounting position | optional | ||
| Based on standard | ISO 15552 | ||
| Piston diameter | 160 mm |
