Material bearing | Bronze Metal polymer compound | ||
Piston diameter | 250 mm | ||
Based on standard | ISO 15552 | ||
Mounting position | optional | ||
Piston-rod end | Male thread Female thread | ||
Position detection | Via proximity switch | ||
Variants | Extended male piston rod thread Piston rod with female thread Custom thread on the piston rod Extended piston rod High corrosion protection Through piston rod Heat-resistant seals max. 120°C Screwed-on swivel mounting position Spacer bolt on end cap side Spacer bolt on both sides Spacer bolt on bearing cap side Variable spacer bolt length Shortened male piston rod thread Piston rod at one end For proximity switch | ||
Mode of operation | Double-acting | ||
Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
ATEX category dust | II 2D | ||
Explosion ignition protection type for dust | c T120°C | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Corrosion resistance class CRC | 2 - Moderate corrosion stress 3 - high corrosion stress | ||
Impact energy in end positions | 2 J | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 28.274 N | ||
Moving mass for 0 mm stroke | 9.978 g | ||
Basic weight for 0 mm stroke | 29.313 g | ||
Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
Material piston seal | FPM NBR | ||
Material piston rod | High-alloy steel High-alloy stainless steel | ||
Buffer seal material | FPM TPE-U(PU) | ||
Material cylinder barrel | Smooth-anodised wrought aluminium alloy | ||
Material collar nut | Galvanised steel High-alloy stainless steel | ||
Material spacer bolt | High-alloy steel High-alloy stainless steel |
Stroke | 1 mm ... 2.250 mm | ||
Piston rod thread | M24 M27 M27x2 M30 M30x2 M36x2 M42 M42x2 | ||
Cushioning | Elastic cushioning rings/plates at both ends Pneumatic cushioning, adjustable at both ends | ||
Conforms to standard | ISO 15552 | ||
Design | Piston Piston rod Tie rod Cylinder barrel | ||
Symbol | 00991217 00991218 00991235 00991237 | ||
Operating pressure | 0,6 bar ... 10 bar | ||
CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
ATEX category gas | II 2G | ||
Explosion ignition protection type for gas | c T4 | ||
Explosion ambient temperature | -20°C <= Ta <= +60°C | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Ambient temperature | -20 °C ... 120 °C | ||
Cushioning length | 55 mm | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 29.452 N | ||
Additional moving mass per 10 mm stroke | 384 g | ||
Additional weight per 10 mm stroke | 157 g | ||
Material cover | Cast aluminium, coated | ||
Material piston | Cast aluminium | ||
Material piston rod wiper | FPM NBR | ||
Cushioning piston material | Wrought aluminium alloy POM | ||
Material nut | Galvanised steel High-alloy stainless steel | ||
Material tie rod | High-alloy steel High-alloy stainless steel | ||
Material swivel mounting | Galvanised steel |