Cushioning angle | 12 deg | ||
Material housing | Wrought aluminium alloy Smooth anodised | ||
Material cover | Wrought aluminium alloy Anodised | ||
Type of mounting | Clamped in T-slot Via male thread Either: | ||
Basic weight for 0 mm stroke | 1.220 g | ||
Permissible mass moment of inertia | 0,001 kgm² | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 158 N | ||
Dynamic load torque | 0,35 Nm | ||
Corrosion resistance class CRC | 1 - Low corrosion stress | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Rotary angle backlash | 0,05 deg | ||
Max. impact speed | 0,5 m/s | ||
Protection against torque/guide | Via ball bearings | ||
Symbol | 991,269 | ||
Design | Vane | ||
Fine adjustment | -3 deg | ||
Cushioning | Shock absorber at both ends Elastic cushioning rings/plates at both ends | ||
Piston diameter | 20 mm | ||
Rotation angle adjustment range | 0 deg ... 246 deg |
Material piston rod | Tempered steel | ||
Material seals | TPE-U(PU) | ||
Pneumatic connection | M5 | ||
Additional weight per 10 mm stroke | 52 g | ||
Product weight | 1.220 g | ||
Theoretical torque at 0.6 MPa (6 bar, 87 psi) | 2,5 Nm | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 120,5 N | ||
Ambient temperature | -10 °C ... 60 °C | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Repetition accuracy | 0,1 deg | ||
Max. swivel frequency at 0.6 MPa (6 bar, 87 psi) | 1 Hz | ||
Operating pressure | 2,5 bar ... 8 bar | ||
Variants | Through, hollow piston rod | ||
Position detection | Via proximity switch | ||
Mode of operation | Double-acting | ||
Mounting position | optional | ||
Swivel angle | 0 deg ... 246 deg | ||
Stroke | 100 mm |