| Material cylinder barrel | Wrought aluminium alloy Anodised | ||
| Material seals | NBR | ||
| Material wiper | Bronze | ||
| Material rod clevis | Cast steel Tempered steel | ||
| Type of mounting | Via swivel mounting on bearing cap With accessories | ||
| Additional weight per 10 mm stroke | 65 g | ||
| Additional moving mass per 10 mm stroke | 39 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 3.016 N | ||
| Cushioning length | 30 mm | ||
| Ambient temperature | -10 °C ... 60 °C | ||
| Corrosion resistance class CRC | 0 - No corrosion stress | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Operating pressure | 1 bar ... 10 bar | ||
| Position detection | Via proximity switch | ||
| Design | Piston Piston rod with rod clevis Swivel mounting on bearing cap Cylinder barrel | ||
| Cushioning | Pneumatic cushioning, adjustable at both ends | ||
| Piston rod thread | M20x1.5 | ||
| Stroke | 125 mm |
| Material piston rod | Tempered steel Hard-chrome-plated | ||
| Material cover | Die-cast aluminium Anodised | ||
| Note on materials | RoHS-compliant | ||
| Pneumatic connection | Rc3/8 | ||
| alternative connections | See product drawing | ||
| Basic weight for 0 mm stroke | 4.185 g | ||
| Moving mass for 0 mm stroke | 1.651 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 2.721 N | ||
| Impact energy in end positions | 1,8 J | ||
| LABS (PWIS) conformity | VDMA24364-B2-L | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Mode of operation | Double-acting | ||
| Piston-rod end | Male thread with rod clevis | ||
| Speed regulation | Integrated flow control at both ends | ||
| Mounting position | optional | ||
| Broad rod clevis/swivel mounting | 28 mm | ||
| Piston diameter | 80 mm |
