Material spindle | Steel | ||
Size | 120 | ||
Spindle diameter | 25 mm | ||
Mounting position | optional | ||
Design | Electromechanical linear axis With ball screw | ||
Spindle type | Ball screw | ||
Max. acceleration | 15 m/s² | ||
Repetition accuracy | ±0.02 mm | ||
Degree of protection | IP40 | ||
2nd moment of area Ix | 5.010.000 mm⁴ | ||
2nd moment of area Iz | 5.010.000 mm⁴ | ||
Max. force Fz | 6.890 N | ||
Max. radial force at drive shaft | 500 N | ||
Torsional mass moment of inertia It | 1.430.000 mm⁴ | ||
Feed constant | 10 mm/U | ||
Material driver | Wrought aluminium alloy Anodised | ||
Note on materials | RoHS-compliant | ||
Material guide slide | Steel | ||
Material slide | Wrought aluminium alloy Anodised |
Working stroke | 400 mm | ||
Stroke reserve | 0 mm | ||
Spindle pitch | 10 mm/U | ||
Guide | Recirculating ball bearing guide | ||
Type of motor | Stepper motor Servo motor | ||
Symbol | 991,211 | ||
Max. speed | 0,6 m/s ... 0,75 m/s | ||
Duty cycle | 100% | ||
Ambient temperature | -10 °C ... 60 °C | ||
2nd moment of area Iy | 5.820.000 mm⁴ | ||
Max. force Fy | 6.890 N | ||
Max. moment Mx | 144 Nm | ||
Max. feed force Fx | 1.500 N | ||
Mass moment of inertia JH per metre of stroke | 2,756 kgcm² | ||
Material end cap | Wrought aluminium alloy Anodised | ||
Material profile | Wrought aluminium alloy Anodised | ||
Material drive cover | Wrought aluminium alloy Anodised | ||
Material guide rail | Steel | ||
Material spindle nut | Steel |